Search results

I would drain the fuel, if it came with the ground, get a fresh start with it. Drain it and change the fuel filter. Then put a fuel additive to help with those issues.

Thats funny

I have the lawn tires on my Kabota L175. I am looking to swap for a set of farm tires and rims.shoot me a email or call me. Ryoungcpd7@yahoo.com 618 615 1166

Ah ha, moment. I just watched the video and that helped out. What a great add on.

Ive read through the reply's and seen several people talk about the 3rd function, my question what is the 3rd function and what does it do?

That's an awesome set up. I was wondering about the grapple set up. I have a lot of brush/ Russian olive to clear out and hoping your set up like it is would be what i needed.

Re: 175L leaking oil XMikew, I checked the cap today and it was clogged. Going to top it off tomorrow and see if that was the problem. Thank you for the help.

Re: 175L leaking oil That makes a lot of since if that vent is clogged then it's over pressurizing. Thank you for that suggestion.

My 175L is leaking gear oil around the pto engage lever and gear shifter. I looked in the shop manual and it show two seals #14. I'm thinking I will need to replace these two seal but would like some input first before I begin.

Thank you for those who responded to my question. I never thought about a rake, I'll see if I can find one. I still would like to try a 4 foot BB. Thank you again.

I'm needing a box blade to help maintain a driveway. Was wondering if a 5ft blade would be to big for the L175.

I'm in search for the grease fitting locations on a Kabota L175. Anyone have a diagram showing the locations.

Put an edge on new blades for my 4 foot brush hog.

I'm new to this whole tractor life. I seen some information on people using chains on their brush hogs. Any benefit to using chains?

I'm Glad I stumbled across this post. I just bought a L175 with a mid mount mower and pulley drive system. I haven't started the process of removing the deck or pulley yet but at least now I have some tips on removing the pulley. Is there any special way to remove the deck? Thus is my first...

I would think you could mow a little faster as long as your blades are sharp.

Thanks for the info on the mix, I will be trying it. I'm having trouble locating replacement blades. Everywhere I look the blade's have a bend in them. The one on it are straight.

It took me a little bit to find the front part of the PTO, but a buddy of mine came to the rescue and give me what I needed to fix that. I not sure what size blades it will take. The ones that were on there are rusted and broken. I coated the nuts and bolts with PB Blaster so hopefully when I...

It took me a little but to find the front part of the PTO, but a buddy of mine came to the rescue and give me what I needed to fix that. I not sure what size bladesign it will take. The ones that were on there are rusted and broken. I coated the nuts and bolts with PB Blaster so hopefully...

I dug up this old 48" Brush Hog and was wondering if its missing any parts just by looking at it. I would think it would require some sort of wheel attachment to use as a height adjustment. The gear box still turns freely and i'm trying to get it back into usable condition. Any suggestions?