Search results

Was tough getting the tractor going again yesterday,and tractor was down on power(have had fuel issues)so after getting the snow cleaned up here,I topped up the tank again and headed over to a elderly neighbor and cleaned up her drive. Man is she a cranky old girl,played foreman the entire...

Anouther in the omg,it's so cold theme. what is the optimal amount of time to have the tractor plugged in with these extreme cold temps before attempting to start?

It bitter cold,result,need more firewood. Went to cut some today,had to plow the skid path first. After a short time,tractor started loosing power. Died a few times,but restarted often enough to get back to the house. Pulled the filter,full of slush.Kubota dealer closed,so cleaned out fliterally...

My b1750 is rolling very slow with the recent cold snap,not enough to start it today,In fact It hardly rolls. It will only fit a small battery,one in it is rated at 425 cca,and the best I can find tops out at 500cca.is this adaquate in well below freezing temp to glow then roll a d950 engine?

Is this the correct way to plumb a Kubota loader valve?

I'm a little heartsick,and not sure if I have destroyed my tractor,or what's the cause. Anyone who follows this board prob knows I rebuilt the hst on my tractor,and have around 20 hrs of flawless operation since. Also added a loader,put a good 5 hrs without a problem. Then tonight. Snowed all...

Thinking my next step is to load the rears and invest in some chains. I've had traditional twist link,and v bar in the past on other tractors,and I think the v bar are well suited to my gravel drive. Like the smoother ride of single link spacing,but not sure there is a traction advantage,and...

Hydraulic outlet block siezed I am nearing the completion of installing the loader on my b1750, but have hit a stumbling block,I can't move the leaver on the hydraulic outlet block in order to divert flow to the loader. Lock plate is off. I am reluctant to use force,any recommendations?

So,maybe I'm a bit possessed,I bought a salvage tractor today,a b7100 that caught fire.it has a la300b loader that was arty touched by the fire.im hoping I can fit it onto my b1750. Is anyone familiar with this model of loader? What are its features and what if anything besides the b7100 was it...

Does the manner I witch the brakes are set up affect the performance of the differential? Put about 5 hours on my b1750 today grading topsoil,and noticed the power is almost always on the right hand wheel, and the differential is not as easily manipulated as with other tractors I have had.I am...

As per my comment on my turf tire thread,the rear hubs on my b2750 seem to be turned backwards,nuts on the inside of the rims,what's this about? If it suits the offset of my new rims,any issue with turning them?

In a post below,I was warned a slight variance in tire size in a 4x4 tractor can put undue strain on the drivetrain,makes sense ,right. I also read somewhere on the web ,if any variance must be had, the rears should lag behind the fronts,so the front in effect is pulling.in my manual,for...

The rears on my b1750 are 31x13.3x15. I quickly learned yesterday they pug with dirt very quickly,and I imagine they will be the same in snow.certainly don't need the width. I don't want ags,as I will be crossing the lawn frequently,but not going to mow with it so don't need turfs. I'm wondering...

Now that I have my b1750 working I'm looking ahead to snowblowing. I have a 48" Argo trend that worked good on my old b6100,but thinking the b1750 could handle a bit more,at least 54" ,or maybe 60",or should I stick with the 48"?

So it's been awhile but bottom line,I learned a lot,and tractor is back together and working well. I bought another trany from a member here who was kind enough to ship it to me. It was out of a f2400, and the older style,and fit fine,just had to change one gear as it had a different tooth...

Just venting. Trying to split my b1750 so I can pull the hst and have a look,had oi about a inch or so apart but something was hanging up. Turned out to be the link for the hydro pedal I missed. Been over an hour trying to get the pin out of it,man,what a place to get into!

It my quest for a transmission I have found a older one. Will the older style tranny fit in place of the newer style?

So now I seem to be in the market for a tranny for the b1750. I have identified the tranny as part # 66415-11600, subs to h6640-10600. Is there a way I can identify what other models may use this tranny so I can widen my search?

So I got the new to be b1750 home,and as expected hydrostatic slows down after a short time mowing. I changed the hydro oil and filter,no improvement. No surprise but was worth a try I guess. I have downloaded a workshop manual . What's the logical next step?

So my new to me b1750 will be coming home this coming Saturday,I know it has a tranny issue,gets weak after about 20 minutes of use. In the mean time I've decided to scrap my g2000. I have already put a pto idler and two new pto belts on it this year,and due to wear in the pto those belt are...