Search results

  1. R

    M7040 A/C doesn’t blow hard

    Sorry for the delay..... The line that I found (I’m assuming) was the drain line was on the left side at the back of the engine compartment close to the cab and came out just above where the loader frame attaches. Not sure if that was it or not though. Sent from my iPhone using Tapatalk
  2. R

    M7040 A/C doesn’t blow hard

    Update: Found the drip line for the A/C. It was pretty dirty and clogged. I cleaned it by running a coat hanger up the tube and prayed water up the tub with a water hose. But still it seems like something else could be wrong because I can’t get any water to flow out of it after it has been...
  3. R

    M7040 A/C doesn’t blow hard

    Yes and had no luck Sent from my iPhone using Tapatalk
  4. R

    M7040 A/C doesn’t blow hard

    Well pulled the seat, floor pan, seat pan and the plastics. Lots of dirt!!! Vacuumed and blew all the everything out with a air hose. It definitely blows harder than before. I let it sit outside and just run for a bit and noticed I wasn’t dripping any condensation from the A/C. I tried to find...
  5. R

    M7040 A/C doesn’t blow hard

    Thanks. I’ll be taking the seat apart tomorrow and checking that since all my filters are clean. Sent from my iPhone using Tapatalk
  6. R

    M7040 A/C doesn’t blow hard

    I have a M7040 4x4 (unsure on exact year) that has 1100 hours and the A/C doesn’t blow hard at all. The air is extremely cold though. I’ve thoroughly cleaned all the filters, radiator, a/c coils etc. I have to keep all but one or two closed, if I open them all you can still feel the air coming...
  7. R

    Questions about flail mowers

    I’ve never had one, but have always had rotary mowers of varying sizes. I have some property I’m wanting to clean up and the drag mowers I have are either just a tad to big to make it where I need to go or it’s too much hassle to back up. So I’ve decided to either buy a 3 point mower or flail...
  8. R

    Kubota rear remote complete set-up

    SOLD Sent from my iPhone using Tapatalk
  9. R

    Leinbach auger height issues

    Well guys thanks for all the help but I’m just going to assume that there is nothing to do that will fix the problem. And that it may be a longer support arm for digging deeper. My next to ideas are to either move the connecting plate that’s on bottom of the boom to the top or use a chop saw and...
  10. R

    Leinbach auger height issues

    Here are the pictures. This is the configuration I left it in yesterday. Sent from my iPhone using Tapatalk
  11. R

    Leinbach auger height issues

    Ok peeps so I had a gentleman give me a leinbach auger that has been sitting for some years. After tearing it apart and replacing some small minor things I put it on the tractor and no matter which combination of pin placement I did the highest I’ve been able to get it to raise is about 1/2” off...
  12. R

    Kubota rear remote complete set-up

    Finally got the pictures Sent from my iPhone using Tapatalk
  13. R

    Kubota rear remote complete set-up

    Sent you a PM Sent from my iPhone using Tapatalk
  14. R

    Kubota rear remote complete set-up

    I have a complete set-up to put on a rear remote on my L4600 that didn’t have any remotes when I bought it a few years ago. I have since sold the tractor and replaced it with another. The parts are still in the box, not sure what other models it will fit. I paid $900 from the local kubota dealer...
  15. R

    M7040 hydraulic shuttle questions

    I have a M7040 with the hydraulic shuttle and have a couple questions 1. I know you don’t have to use the clutch with the hydraulic shuttle, so is it best to go to stop in neutral either for a second or two before changing directions, come to a complete stop before changing directions or just go...
  16. R

    M7040 using hydraulic fluid

    Thanks for all the assistance. I ended up finding a fitting that was loose on my tree puller and the way it was leaking was not causing any of the fluid to fall on or hit any metal and was being soaked up by the brush. Thanks again for all the suggestions Sent from my iPhone using Tapatalk
  17. R

    M7040 using hydraulic fluid

    I have a 4x4 cab M7040 with hydrastatic shift and the past two days I have spent approx 7-8 hours each day moving dirt with the FEL. I checked this evening and noticed I was low on hydraulic fluid. Yesterday before I started I checked the level and it was good. There was no indication of fluid...
  18. R

    Adding hydraulics to a rear blade?

    It’s a king kutter
  19. R

    Adding hydraulics to a rear blade?

    Has anyone ever added hydraulics to a 3 Point rear blade or know of any plans out there on the internet? I’ve got a 7’ blade and I think I have a good idea as to how, just thought I would ask for some input first. Thanks in advance for any help Josh