Search results

Doing a little Brush Pile work caught a branch and ripped out my Hydaulics 2000 L3600 The pipe feeds to the Filter housing Here are the pics, it looks like I just need to get A new pipe, What is this part actually called ?? The rubber seals A new locking piece and bolts Trying to figure out I...

This might be a stupid question since I have zero issues starting my tractor but it has been bugging me since I keep reading it on here.. In many of the "Cold Weather Starting" threads I have read posts that say "Mine started, but it took 5-20 seconds of Glow Plugs before it did" Question...

So after blowing a Hydraulic line and misting the entire cab area with a fine spray of slick oil I have a small problem My Tilt Wheel Adjustment lever is slipping So I took it apart and found the bolts that look to tighten it, I tightened those down but it is still slipping My next idea is...

I don't get it.. I blew the IN hose for my FEL of Thursday.. I noted that one of the other main hoses was worn too I had both hoses replicated at a very reliable shop This morning I carefully and methodically replaced both hoses, they CANNOT be switched mistakenly I changed the filter and...

With the purchase of the wife's Jeep Cherokee "LIMITED" two winters ago and the realization that if you don't buy a freaking "Trailhawk" you don't get Tow Cleats/Hooks, I have had to rethink what to keep on the Kubota to pull her and the neighbors out of the snowbanks and ditches. I have never...

So 2 years ago I got this Magnetic LED light from Harbor Freight it was one of the coupons that you get in their mailer I either paid $1.99 or it was free with purchase :) I tucked it behind the seat stuck to the toolbox, and luckily never needed it until Friday morning We got about 8" of snow...

Okay this is going to sound confusing but I will try and push through I have had a 60" Snow Blower that I moved over from my L185 to the Newer L3600 since 2012 Sometime around 2016 I added a set of Pat's but the shaft still engaged and I had no probs. Everything worked fine and I have...

First off a huge shout out to my friend and neighbor North Idaho Wolfman for taking the time to talk me through this.. I started getting a buzzing under the dash during the glowplug cycle when turning the key on my L3600 last snow season I knew the battery was old and weak so I changed that...

Need some more thoughts here gents I just blew apart the U-Joint and PTO cradle on the snowblower Yes I was pushing it hard, it was my fault BUT Why would that blow apart rather then the Shear Pin I checked the obvious before I go to town to buy a new PTO shaft The PTO is spinning when...

I have put this together over the last couple of years and since I am sitting here having my second cup of coffee while the Bota' warms up I figured it might help out others to see what I have found that works :) Funny things, Block Heaters So after a couple of years I finally have it...

It seems that I am always finding new ways to use these things :) Finally getting around to putting the new Wellhouse together, building the walls and you end up with these monsters that weigh in at "Way too Damn Much" so ya break out the Kubota and the pallet fork... I never...

So after a few years of trying various "Solutions" to solve wet sticky snow I finally found the fix, at least for me At the beginning of the season I go to Walmart and buy a new can of this stuff Why a new can every year ??? Because I am an idiot and inevitably leave it out in the barn to...

Ok need some ideas I own this blade http://www.kingkutter.com/store-product.aspx?id=3337 Can anyone think of a way to modifiy it to offset, even just to the right.. I know, I know, I screwed up when I bought it and should have thought of that issue ahead of time, and just bought the 6...

I was set to buy these after this video https://www.youtube.com/watch?v=-Va4zBVLIps Then I found these two https://www.youtube.com/watch?v=hv5L7aSmqt8 https://www.youtube.com/watch?v=-Gtd2avh-S4 The second vid shows some issues with them, However this might be a case of expecting too much...

I am pretty sure of the answer here but I figured I would ask I have been cleaning up around the property clearing out under the trees and around the outbuildings.. I have been just using a heavy logging chain to yank out small trees and brush. Now keep in mind I am working alone so it is up...

Did some heavy work finally on this tractor.. Spreading the gravel was actually pretty easy, with the combination of the FEL and the Box Blade... Although regardless of how good you think you are sooner or later you have to climb down out of that seat and rake in some of the rock LOL Oh my...

Just got these in http://stores.palletforks.com/-strse-72/Clamp-on-Pallet-Forks/Detail.bok?xcategory=Pallet%20Fork%20Attachments%3AClamp%20on%20Pallet%20Forks%3AHD%20Clamp%20on%20Pallet%20Forks The weather of course is not going to comply for me to get them on today, plus I still have just a...

As I had posted in the past, over the Winter I purchased a bigger tractor, when I bought it the ticker was showing 1073 hrs, now she has 1100 The previous owner was pretty good about keeping records for dates and times, he marked the filters so I knew that many things were in pretty good shape...

So guys here is where I am at.. I bought a used L3600DT The tractor obviously had a good owner before as every filter is marked with the Hours that it was last replaced.. I got though the Winter leaving everything alone, but now with the warmer weather here I want to dump and change...

Ok this might be a dumb question but I always thought it was an issue with my old L185 because it was just old :) Now I notice that the L3600 does the same.. When I am using the 3PT Rear Scrape Blade and the FEL clearing snow, I have noticed that if I raise the the rear blade all the way to...