Search results

It's almost time to replace my mower blades, i have a 60" deck model rck60-30ba. If the grass ever stops growing i will take it off and replace them it hasn't been cutting very well lately. Is the bolt that holds them on turn counter clockwise to loosen? or is it backwards. BTW does anyone...

I can not find a parts diagram for a RCK60-30BA only the RCK60-30B. Yeah i'm sure the 72" model uses different parts.

My belly mower is model RCK60-30BA the manual list RCK60-30B and RC72-30B. I guess they use the same parts. I'm looking for the mower blades and the main belt part numbers. My belt is fine just want one on hand not sure how long they last local dealer said it was $124 :eek:

Thanks for the help guys.

Looking to buy some sockets sets to work on my B2650 when needed. Are all bolts on the tractor metric? If so are they 12 point or 6 points? I guess 3/8 would be a good size to buy sockets in. Thanks!

Nice i have the same thing just without the back hoe. Any chance you can take a pic of your 60" MMM front middle link? I never got mine right.

I finally got it to hook up right without it raising the front wheels off the ground but as soon as i hit a few holes etc in the yard it gets knocked back to the wrong slot. I've tried to shorten it and it will still fall back in the wrong slot. If i shorten it to much it will raise the front...

I thought of that but it's still not down far enough but it will give me something to work with if i use spacers, i remember seeing them at tractor supply. My old lawn mowers hitch was only a few inches from the ground. Do they make grass sweepers for larger tractors?

I thought about doing that but i don't have a welder. I still find it strange they don't make a drop tow bar hitch. It comes off with one pin. It's a small grass sweeper

This should work.

Do they not have a drop hitch that replaces the stock Drawbar Hitch? I see it comes off with one pin. Adding a 3 point hitch would work but i would need to buy two things instead of one. BTW can the 2650 lower the MMM and not the 3 point?

Do they make drop hitches for tractors? I'm trying to hook up a small implement and the hitch on a B2650 is to high would be great if it was adjustable.

Do you guys let your tractor warm up any before doing a task such as mowing? And after do you let it idle for a few min to cool off or just shut it down? When i use my MMM i use around 2100-2300 RPM is the right RPM?

Thanks i will check that out.

I will look at that this weekend but wouldn't the wheels hit first or does it actually let the deck move forward?

My front linkage is the same as what the book calls for 19.9 inches. I will look into the back this weekend damn grass is growing like crazy! The back is probably wrong to because when the mmm is off there is a bracket that holds up the rear link to stop it from going down when not in use and...

So lower the two wheels on the rear of the deck that are not touching the ground at all like in the picture? I guess that would help but what about the linkage hook up is it possible the manual is wrong? Even if it is wrong that don't explain why the wheel hits that bar. Thanks for your help!

It has 2 pivot wheels on the front of the mmm. Here's a picture of how the dealer had it hooked up notice the bar above the center wheel side view and hydraulics all the way down. The only wheels that touch the ground are the two front pivot wheels and the rear center wheel. This is how i mow...

I bought a new B2650 with a 60" mower deck model RCK60-30BA, The other day when i was mowing i noticed that the front middle anti scalp wheel was not turning because the dealer has the mmm front linkage hooked up wrong. That bar across the top of the wheel stops it from spinning freely. In...