What did you do to or on your Kubota today?

BX23S-1

Active member
May 29, 2017
535
197
43
No where Special
Yep - - I like your neck of the woods. Finger Lakes is a nice area.

Bill A/K/A Chanceywd is between us, as he mentioned. I got about the same snow yesterday that he did.
Yes, i think he`s up around Cortland NY.
Unreal, he is basically across Cayuga lake from me, and he got hit, and we got nothin.
 

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
14,094
2,755
113
SW Pa
I checked how much snow I got today too,,,, it was green
 
  • Haha
Reactions: 1 user

Quick

Active member

Equipment
B2601, LA435, BH70, LP SGC0554 Grapple, LP RB1672 Rear Blade, King Kutter 60" BB
Sep 23, 2021
140
247
43
St. Clair, MO.
Spring is coming. Will need mulch, compost, gravel, top soil, etc.

Since I don't have a dump trailer, I built an off loading ramp for my utility trailer. Used the BH to dig a trench and dropped two 18' trees in, stacked. Dug out the backside about 12' wide so I can just back my loaded trailer up to it so it's level. Can just drive my tractor onto the back of the trailer and off load with bucket. Or, that's the plan, at least. Not tried it yet. :p
20230305_162050.jpg

Had a buddy give me a load of creek gravel for a base for the trailer tires. Had to get crafty to unload the gravel. (-;
20230306_154803.jpg
 
  • Like
Reactions: 9 users

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,286
4,851
113
Sandpoint, ID
Spring is coming. Will need mulch, compost, gravel, top soil, etc.

Since I don't have a dump trailer, I built an off loading ramp for my utility trailer. Used the BH to dig a trench and dropped two 18' trees in, stacked. Dug out the backside about 12' wide so I can just back my loaded trailer up to it so it's level. Can just drive my tractor onto the back of the trailer and off load with bucket. Or, that's the plan, at least. Not tried it yet. :p
View attachment 98049
Had a buddy give me a load of creek gravel for a base for the trailer tires. Had to get crafty to unload the gravel. (-; View attachment 98051
Your pit is a little close to the house! :oops:
 
  • Like
Reactions: 1 user

Quick

Active member

Equipment
B2601, LA435, BH70, LP SGC0554 Grapple, LP RB1672 Rear Blade, King Kutter 60" BB
Sep 23, 2021
140
247
43
St. Clair, MO.
Your pit is a little close to the house! :oops:
Yes, thought of that. I measured and should be fine. Hard to tell in the pic, but it is also slightly angled so I won't have to back the tractor straight out and against the garage. Will know for sure soon enough.
 
  • Like
Reactions: 1 users

BAP

Well-known member
Lifetime Member

Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
Dec 31, 2012
2,513
657
113
New Hampshire
Spent last 2 days dealing with 30” of heavy wet snow. Snowblowed 2x Tuesday. Power went out around 11am. Hooked up the 12kw PTO generator to the tractor and ran it until 8:30pm when power came back on. Only burned 3-1/2 gallons diesel. Yesterday proceeded to dig everything out including one of my neighbors who is on crutches after ripping the tendon over his knee earlier this winter. Snow became so sticky as the day went on that it would plow ahead instead of feeding into the blower. So I swapped to the loader and used the bucket instead.
 
  • Like
  • Wow
Reactions: 4 users

River19

Well-known member

Equipment
B2601, RB1560, BB1260 and BX2830 blower
Sep 10, 2020
323
475
63
NH/VT NEK
So.....I am officially sick of winter and as enjoyable as clearing snow is with my blower and blade on the B2601..... we just got hammered with 38" in NH on top of 18" last week and frankly after 10hrs on the tractor in 2 days I need a break......

Finally broke a shear bolt late yesterday after getting 80% done with a neighbors drive as their plow guy stopped me and asked for a favor as he was afraid he couldn't move it as it was downhill and the full 38"......I cleared most of it then hit a downed limb. Whatever, I needed something to stop me and tell me to go inside. I'll fix it today, maybe.

Downed trees everywhere, been on generator since 6am Tuesday morning......might be another 2-3 days on that.

Spent 45 mins trying to find my mailbox under a downed limb stuck in a snowbank.

2nd to last picture is a pic of my 4' dog fence......good luck seeing it......

Bent my damn roof rake as well......so I need to solve that today while pretending to care about the 7 meetings I have today for work. Heck of a week.
IMG_4476.jpeg
IMG_4477.jpeg
IMG_4478.jpeg
IMG_4482.jpeg
IMG_4485.jpeg
IMG_4488.jpeg
 
  • Like
  • Wow
Reactions: 13 users

g_man

Well-known member

Equipment
L3010DT, M5640SUD, Dresser TD7G
Feb 3, 2023
103
428
63
NE Vermont
Finally had the air ride seat installed and picked up the rear blade for light ditching, driveway stone work and snow removal. I have the camo seat cover for the factory suspension seat - I’ll give it to anyone that can use it.

View attachment 98037

View attachment 98038
Pretty comfy looking seat. Just seeing that picture makes me want one !

gg
 
  • Like
  • Haha
Reactions: 2 users

Flintknapper

Well-known member
Premium Member

Equipment
L2350DT
May 3, 2022
1,558
1,991
113
Deep East Texas
So.....I am officially sick of winter and as enjoyable as clearing snow is with my blower and blade on the B2601..... we just got hammered with 38" in NH on top of 18" last week and frankly after 10hrs on the tractor in 2 days I need a break......

Finally broke a shear bolt late yesterday after getting 80% done with a neighbors drive as their plow guy stopped me and asked for a favor as he was afraid he couldn't move it as it was downhill and the full 38"......I cleared most of it then hit a downed limb. Whatever, I needed something to stop me and tell me to go inside. I'll fix it today, maybe.

Downed trees everywhere, been on generator since 6am Tuesday morning......might be another 2-3 days on that.

Spent 45 mins trying to find my mailbox under a downed limb stuck in a snowbank.

2nd to last picture is a pic of my 4' dog fence......good luck seeing it......

Bent my damn roof rake as well......so I need to solve that today while pretending to care about the 7 meetings I have today for work. Heck of a week. View attachment 98066 View attachment 98067 View attachment 98068 View attachment 98069 View attachment 98070 View attachment 98071
Mowing pasture here and clearing brush off of fence-lines. About 75° yesterday. :)

Mowing Pasture 030923.jpg

Privet Hedge fence1.jpg
 
  • Like
Reactions: 5 users

Mowbizz

Well-known member

Equipment
Bx25d
Aug 19, 2021
438
252
63
New Hampshire
So.....I am officially sick of winter and as enjoyable as clearing snow is with my blower and blade on the B2601..... we just got hammered with 38" in NH on top of 18" last week and frankly after 10hrs on the tractor in 2 days I need a break......

Finally broke a shear bolt late yesterday after getting 80% done with a neighbors drive as their plow guy stopped me and asked for a favor as he was afraid he couldn't move it as it was downhill and the full 38"......I cleared most of it then hit a downed limb. Whatever, I needed something to stop me and tell me to go inside. I'll fix it today, maybe.

Downed trees everywhere, been on generator since 6am Tuesday morning......might be another 2-3 days on that.

Spent 45 mins trying to find my mailbox under a downed limb stuck in a snowbank.

2nd to last picture is a pic of my 4' dog fence......good luck seeing it......

Bent my damn roof rake as well......so I need to solve that today while pretending to care about the 7 meetings I have today for work. Heck of a week. View attachment 98066 View attachment 98067 View attachment 98068 View attachment 98069 View attachment 98070 View attachment 98071
I got nowhere near 38” WOW! A heavy 15” from this storm and I have had it as well. Glad I stocked up on shear pins as I lost 2 in this storm. Just walking down to the road to get mail, I picked up several 4-6” chunks of pavement the town plow truck gifted me…never mind what you can’t see! Hope you get yourself cleared out and ready for whatever Ma Nature Has in store next! The last 3’ storm from 2020. Was using a walk behind blower for this one!
6C12FACF-B8FA-4B9D-A154-06F28787188A.jpeg
BFAB654D-455B-427F-925D-FEDE0A6DE61C.jpeg
 
  • Like
  • Wow
Reactions: 8 users

River19

Well-known member

Equipment
B2601, RB1560, BB1260 and BX2830 blower
Sep 10, 2020
323
475
63
NH/VT NEK
I don't like you at this moment. :)
To be fair, my big win this morning was raking the bottom 8-10" of my roof out front standing in waist deep snow and getting the ice off my impeller on my blower to line up the shafts to replace the shear bolt.

I lined it up, looked at it, looked at the Morton Building only 200' way and said "screw it, I'll do it later" and went in side to warm up.......
 
  • Like
Reactions: 2 users