What did you do to or on your Kubota today?

Biker1mike

Well-known member

Equipment
B6200, Kubota 2030 Front Blade, King Cutter 60" finishing deck
Jan 11, 2022
1,164
1,252
113
Gallatin, NY USA
mcmxi,
Glad to hear you made it out without injury ! Ice sucks.
 
  • Like
Reactions: 1 users

S-G-R

Well-known member
Lifetime Member

Equipment
LX3310, LA535, rear remotes, third function, R14's
Jun 17, 2020
899
1,600
93
PEI Canada
I woke up to 3" of snow on the ground this morning with more falling. The day started out as usual heading down the asphalt driveway and blowing snow, but it soon got interesting. On my final pass down the steep gravel driveway where I use the snow blade, I got close to the edge and didn't realize that it was a sheet of ice under the snow. Every attempt to back up or move forward got me closer to going over. I dropped the blade hard into the snow bank, lowered the blower and applied the parking brake. I knew I was in trouble when I decided to unlatch the right side door in case I had to make a hasty exit. :oops: The arrow in the photo below (taken last year) shows the approximate location of where I was this morning when it all went south.

I had just seen my neighbor plowing and sanding/salting his driveway so I called him and asked him to help me out. I have a bunch of equipment to pull the MX out but I needed another person. I went back to the house/garage and grabbed two long tow straps and two shackles, slipped over twice on the ice, and headed back down to the MX. It only took a couple of minutes for my neighbor to pull me away from the edge of certain doom but I wasn't done slipping on the ice yet. Another hard fall was in store for me.

Fortunately I was so close to the edge that my neighbor was able to come up the drive and get past the tractor, over the crest at the top, and head up my other neighbor's driveway. His truck was heading downhill when he started to pull which is why I got two straps, so that he'd be past the crest of the driveway.

View attachment 96880

View attachment 96884
Hope you didn't break anything on yourself.
 
  • Like
Reactions: 1 user

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25TLB
Feb 9, 2021
4,159
4,761
113
NW Montana
mcmxi,
Glad to hear you made it out without injury ! Ice sucks.
Thanks. It wasn't much fun as the tractor slid precariously close to the edge. This is the first time I've ever had an issue when removing snow and this is my 9th winter at this house. Complacency or over confidence can kill you! :oops:
 
  • Like
  • Wow
Reactions: 4 users

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
8,362
3,990
113
Chenango County, NY
Thanks. It wasn't much fun as the tractor slid precariously close to the edge. This is the first time I've ever had an issue when removing snow and this is my 9th winter at this house. Complacency or over confidence can kill you! :oops:
Sure enough - - glad it worked out without any injury or damage!
 
  • Like
Reactions: 1 user

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25TLB
Feb 9, 2021
4,159
4,761
113
NW Montana
Hope you didn't break anything on yourself.
Thanks. I was surprised that I didn't hurt myself at all. I go to a chiropractor twice a week for preventative maintenance so I guess it's working! I did make the mistake of "posting" which is hard wired into most of us. It's natural to throw one's arm out when we fall but that's a good way to break a wrist, arm or shoulder ... supposedly.
 
  • Like
Reactions: 1 users

NCL4701

Well-known member

Equipment
L4701, T2290, WC68, grapple, BB1572 box scrape, Howes 500, 16kW IMD gen, WG24
Apr 27, 2020
2,528
3,601
113
Central Piedmont, NC
Glad you weren’t hurt and didn’t lose your tractor over the embankment.

Our winters aren’t bad but we get more ice than snow here. Can’t drive on it. Can’t walk on it safely. Sometimes can’t see it if there’s a little snow on top so you’re first notice is when you or your vehicle start sliding. Only good thing is it doesn’t usually last long. Seen a bunch of people break a wrist and occasionally tear up a shoulder throwing out an arm. Better to ball up and roll but hard to do sometimes if your legs are higher than your head 0.1 seconds into it. Ice sucks. Particularly the refreeze stuff with a little water on top that has a coefficient of friction similar to greased Teflon.
 
  • Like
Reactions: 1 users

Matt Ellerbee

Well-known member
Lifetime Member

Equipment
MX6000
Jun 27, 2019
1,665
1,874
113
Canton, Georgia
I really like the "Wickeder" lid with the 450 Hardox c-channel. I have the older style with DOM tubing only in the lid.(y)
That’s the wickeder-er. See the hinges in the middle?

Also, groove your boots! Just kidding. Ice sucks. Just a little bit shut down Atlanta for days!
 
Last edited:
  • Haha
Reactions: 1 user

Trapper Bob

Well-known member
Lifetime Member

Equipment
L4701, Wicked grapple, 6’ bush hog, pallet forks, 7’ box blade, 6’ Wicked bucket
Jan 17, 2022
422
768
93
63
Andover, KS
Put in some structure for fish today. They are leftover concrete & rock corner posts (without the posts).
Got the dam seeded when the wind went down right at dark. It was a beautiful day.
0B026C95-26CF-4B9C-B5B7-105AE8C8B8E0.jpeg

53C36AC8-91AE-4C30-9BA4-7CD9AEEE39A1.jpeg

6DDBB76A-0057-4553-937E-55DE953123B2.jpeg
 
  • Like
Reactions: 11 users

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
12,980
4,364
113
40 miles south of Kansas City

Trapper Bob

Well-known member
Lifetime Member

Equipment
L4701, Wicked grapple, 6’ bush hog, pallet forks, 7’ box blade, 6’ Wicked bucket
Jan 17, 2022
422
768
93
63
Andover, KS
You got quite a bit of water from that rain. What did you measure? Looked like south of you they had a hand full of twisters.
.60 that came really quick, by the look of things. The wind blew pretty hard as well. Put about 3’ in the pond.
I didn’t hear about the twisters. 🫣
 

River19

Well-known member

Equipment
B2601, RB1560, BB1260 and BX2830 blower
Sep 10, 2020
323
475
63
NH/VT NEK
I don't want to bore you guys with what look like the same pics of me clearing snow from the driveway..... over the weekend I had to clear the driveway each morning as it just kept snowing, not a lot but seems like we got 2-3" each night that would turn to ice....

And of course we had a slow snow storm yesterday where it snowed all day but only amounted to about 3-4". Heading back out in a little bit.

The back blade has been getting the most work with the low depth. Today will be blower and blade per usual.....

Winter.
 
  • Like
Reactions: 2 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25TLB
Feb 9, 2021
4,159
4,761
113
NW Montana
That’s the wickeder-er. See the hinges in the middle?

Also, groove your boots! Just kidding. Ice sucks. Just a little bit shut down Atlanta for days!
Cool. The Wicked 60 that I purchased has the center hinge which was a big selling point for me.

Yeah, I won't tell you what I was wearing on my feet for the first two flops! 😊 In my defense, I was upside down for a third time while wearing Muck Boots with Vibram soles.
 

aaluck

Well-known member

Equipment
L4400HST, Bush Hog 276, RDTH60, Speeco PHD, etc
Oct 9, 2019
928
746
93
Snowdoun, AL
Complacency or over confidence can kill you! :oops:
Truer words have never been spoken. The closest I ever came to tipping my tractor was doing something I had done dozens of times.
 
  • Like
Reactions: 2 users

lakehouse_dreaming

Active member

Equipment
L3901HST, LA525 FEL, RGA1258 tiller, RCR1860 rotary cutter
Nov 2, 2021
59
125
33
29108
First time using the pallet forks, loaded up some scrap that was laying around the house and then played with the grapple for a bit. Still learning how to use it to pull out bigger trees. This one took some work but it finally came out.

Definitely glad I have both, there is a time and place for each.

IMG_6566[1].JPG
IMG_6567[1].JPG
 
  • Like
Reactions: 8 users

Quick

Active member

Equipment
B2601, LA435, BH70, LP SGC0554 Grapple, LP RB1672 Rear Blade, King Kutter 60" BB
Sep 23, 2021
140
247
43
St. Clair, MO.
Ground finally dry enough for some firewood gathering and stump pulling. Plus it has hit the 60's here in mid-MO. Heck, bald head is sun burnt already! (-;
20230301_114707.jpg
20230301_120844.jpg
20230302_102855.jpg
20230302_102936.jpg
20230302_112153.jpg
20230302_133501.jpg
 
  • Like
  • Love
Reactions: 9 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25TLB
Feb 9, 2021
4,159
4,761
113
NW Montana
Ground finally dry enough for some firewood gathering and stump pulling. Plus it has hit the 60's here in mid-MO. Heck, bald head is sun burnt already! (-;
Amazing to see that big stump next to your B series. Great job! (y)
 
  • Like
Reactions: 1 users

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,605
5,066
113
Sandpoint, ID
To ALL OF YOU working in the Dirt / Warm / Sun!
1677798136294.png

I'm not happy with you!
 
  • Haha
  • Like
  • Wow
Reactions: 10 users