Picture of your tractor on your trailer

NHSleddog

Well-known member
Lifetime Member

Equipment
B2650
Dec 19, 2019
2,149
1,822
113
Southern, NH
The only problem that I have ever heard about aluminum is that metal fatigue will kill them sooner than it will with steel.
That is true.

Based on all the 50+ year old aircraft still flying out there, I'm not worried about it though.

I have "fixed" plenty of steel trailers, they break just as much as aluminum. In my case up here the steel usually rusts out first.
 
  • Like
Reactions: 2 users

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
2,854
3,102
113
Wind Gap, PA
I stole it for 2500.00. It should be worth 4500.00 in my area.
You certainly did. If you come across another like that, pm me. They seem to be running in the 6K range in my area.
 

Magicman

Well-known member
Lifetime Member

Equipment
M4900 Utility Special 4WD e/w FEL & 1530 John Deere "Traveling Man"
Oct 8, 2019
5,058
6,438
113
80
Brookhaven, MS
knotholesawmill.com
Yup with that rust thing, you are way ahead of the game. BTW, I wasn't putting down on the aluminum trailer, just hoping that you would tell me to come a get it. ;)
 
  • Like
Reactions: 1 user

NHSleddog

Well-known member
Lifetime Member

Equipment
B2650
Dec 19, 2019
2,149
1,822
113
Southern, NH
Yup with that rust thing, you are way ahead of the game. BTW, I wasn't putting down on the aluminum trailer, just hoping that you would tell me to come a get it. ;)
LOL - No, I have a sweet TIG welder and I'm not afraid to use it! I actually have 3 sons as well that are also always wanting some torch time.
 
  • Like
Reactions: 1 user

NHSleddog

Well-known member
Lifetime Member

Equipment
B2650
Dec 19, 2019
2,149
1,822
113
Southern, NH
I have a friend that has a calibrated scale that he lets me use, I spent an hour over there yesterday weighing my different setups.

This was my heaviest at 4463Lbs, + 1825 for the trailer = 6288.

Every other configuration was lower in weight and better balanced so this trailer should work out nicely.

trailer-3.jpg
 
  • Like
Reactions: 2 users

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
2,854
3,102
113
Wind Gap, PA
I still say that it would look better at my place. :LOL: :ROFLMAO:
yep, now if i can just snag his address, I could find a new home for that shiny trailer.
 
  • Like
Reactions: 1 user

Square Nail

New member

Equipment
L3301HST
Oct 19, 2015
4
6
3
Blue River,WI.
My L3301 on my 7 ton skid loader trailer pulled with my F350 powerstroke. Slight over kill.
20180920_205608[1].jpg
20180920_205626[1].jpg
 
Last edited:
  • Like
Reactions: 3 users

Magicman

Well-known member
Lifetime Member

Equipment
M4900 Utility Special 4WD e/w FEL & 1530 John Deere "Traveling Man"
Oct 8, 2019
5,058
6,438
113
80
Brookhaven, MS
knotholesawmill.com
Not an overkill at all when that is what you have and what you use. Looks good!!!

Now this might be considered as overkill, but it was a cute advertisement.

IMG_0461.JPG

What is that?
IMG_0463.JPG

I need a closer look.
IMG_0462.JPG

Yup, it's what I though it was!!
IMG_0464.JPG

Red Wagon Express.
IMG_0466.JPG

And I got a nice wave from the driver when he spotted me taking pictures. :)
 
  • Like
Reactions: 7 users

troverman

Well-known member

Equipment
MX6000 HSTC; 2020 Kubota Z421KW-54 zero turn mower
Jun 9, 2015
1,184
263
83
NH
L2501 and MX4800 each with flail mowers and loaders and loaded rear tires. Trailer is 25+5 feet, empty weight of 5700lbs; GVWR of 16,000lbs. Probably a couple of thousand pounds over the trailer limit but the truck is taking some of the weight. Tow vehicle is a 2018 RAM 3500 Cummins with 6 speed manual trans.

IMG_5470.jpeg
 
  • Like
Reactions: 1 users

ayak

Well-known member
Lifetime Member

Equipment
L3301 HST
Feb 16, 2018
568
720
93
WV
Now that’s a load.
Is a CDL required for where you are?
 
  • Like
Reactions: 1 user

troverman

Well-known member

Equipment
MX6000 HSTC; 2020 Kubota Z421KW-54 zero turn mower
Jun 9, 2015
1,184
263
83
NH
Now that’s a load.
Is a CDL required for where you are?
CDL is a federal requirement for combinations over 26,000lbs GVW regardless of what the state does, so in this case, yes. The truck pictured is 14,000GVW and the trailer is 16,000GVW = 30,000 GCWR, which requires a Class A CDL.

Believe it or not, if you towed this same load with a diesel 3/4 ton, no CDL is required. The 3/4 ton trucks are all rated at 10,000GVW and so combined they fall just shy of the requirement. However, a 3/4 ton doesn't really have enough payload capacity to handle this trailer with the tongue load pictured, especially if its a diesel 3/4 ton (which is pretty much needed for pulling this much weight). Maybe Ford's new 7.3L big block gas V8 would be adequate, I don't know.
 
  • Like
Reactions: 1 user

BigG

Well-known member

Equipment
l2501, FEL, BB, Rotary cutter, rake,spreader, roller, etc. New Holland TL80 A
Sep 14, 2018
1,950
774
113
West Central,FL
L2501 and MX4800 each with flail mowers and loaders and loaded rear tires. Trailer is 25+5 feet, empty weight of 5700lbs; GVWR of 16,000lbs. Probably a couple of thousand pounds over the trailer limit but the truck is taking some of the weight. Tow vehicle is a 2018 RAM 3500 Cummins with 6 speed manual trans.

View attachment 45804

Could you load the MX backwards? If so you could, lift the FEL up in the air, flip your ramps down flat and lower the bucket on top of them. Might save a little drag on the load. Not much but with all that on the trailer every little bit would help.
 
Last edited:

troverman

Well-known member

Equipment
MX6000 HSTC; 2020 Kubota Z421KW-54 zero turn mower
Jun 9, 2015
1,184
263
83
NH
Could you load the MX backwards? If so you could, lift the FEL up in the air, flip your ramps down flat and lower the bucket on top of them. Might save a whole lot of drag on the load. Not much but with all that on the trailer every little bit would help.
I tried that, but the length of the flail mowers are deceiving. You cannot lift one high enough to get far enough forward to get the ramps to lay flat whether facing forward or rearward. I'm not too worried about fuel economy though - its all factored into the cost of doing a job. I'd get somewhere around 10-11mpg with this load.

I've since moved on to a 2019 RAM 3500 without the duals, but with the new 1000lb-ft Cummins diesel. There is a little stability lost but the power is quite exceptional.
 
  • Like
Reactions: 1 users

bx tractorjoe

Active member

Equipment
kubota l2501 upgraded from a bx23s john deere 670 husquarvana huv 4421 gxp
Jun 3, 2020
258
140
43
loxahatchee flordia
Here is my old bx23s on my 18 foot big tex.. just towed it around the block for the heck of it..

And my JD 670 the night I brought it home.. you can see my old ford 340b in the background that I sold
 

Attachments

Last edited:
  • Like
Reactions: 1 user