L3400 issue

[Mijpa]

Tried using travtor today dash lights up but when turn key fully I get nothing like totally dead.

battery seems good 12.4v about same at starter switches ohmed good any idea??

 

[85Hokie]

Battery is NOT good at 12.4 ..........
check ALL your cables - Especially the ground.

You have a battery to jump with by chance?

 

[North Idaho Wolfman]

Check the PTO and if it's an HST check the position of the treadle pedal.

 

[Mijpa]

Battery is NOT good at 12.4 ..........
check ALL your cables - Especially the ground.

You have a battery to jump with by chance?

I did use a fully charged jump pack with no difference

 

[Mijpa]

Check the PTO and if it's an HST check the position of the treadle pedal.

I ohmed out the switch it was good

 

[North Idaho Wolfman]

Do you have the WSM (aka Service manual) ?
It has all of the troubleshooting info in it.

 

[Mijpa]

Do you have the WSM (aka Service manual) ?
It has all of the troubleshooting info in it.

Negatory, unfortunately I don’t have one.

 

[old and tired]

Sounds like a safety switch to me.... Is it a manual or HST?

Here a WSM; https://kubotabooks.com/AutoIndex/i...2800-L3400 Workshop Manual 9Y011-13193(1).pdf

 

[Mijpa]

Sounds like a safety switch to me.... Is it a manual or HST?

Here a WSM; https://kubotabooks.com/AutoIndex/index.php?dir=Tractor Owners Manuals/&file=L2800-L3400 Workshop Manual 9Y011-13193(1).pdf

Thank you! It is a HST.

 

[old and tired]

Hold the key in the Start Position, and move the HST pedal back and forth slowly. Wiggle your butt in the seat, more your weight around. Then play with the PTO switch, force it further backwards with the key in the Start position...

 

[Mijpa]

Hold the key in the Start Position, and move the HST pedal back and forth slowly. Wiggle your butt in the seat, more your weight around. Then play with the PTO switch, force it further backwards with the key in the Start position...

Yep I tried that last night

 

[Mijpa]

Tried using travtor today dash lights up but when turn key fully I get nothing like totally dead.

battery seems good 12.4v about same at starter switches ohmed good any idea??

Ok I finally found problem. I jump starter and it spun so I moved back to neutral safety switch. It is making contact with plunger just not enough , I put a small rock in between plunger and bracket that makes contact fires right up.

so how do I fix something that already has pre drilled holes for safety switch I can’t move it up or down?

 

[North Idaho Wolfman]

I do believe the switch is adjustable.

 

[Mijpa]

I do believe the switch is adjustable.

Thx I’ll check into this weekend.