[facepalm] SSQA:

Showmedata

Active member

Equipment
LX3310
May 18, 2022
177
139
43
Boulder CO
[facepalm] SSQA: I just discovered last week that by raising the loader all the way up, I can stand up in the cockpit and reach the SSQA levers.
no need to climb down to the ground for that.

YMMV based on your reach.
 
Last edited by a moderator:
  • Sad
  • Like
Reactions: 2 users

ve9aa

Well-known member

Equipment
TG1860, BX2380 -backblade, bx2830 snowblower, fel, weight box,pallet forks,etc
Apr 11, 2021
1,202
974
113
NB, Canada
Sounds like an accident waiting to happen.

I hope I'm wrong.
 
  • Like
Reactions: 1 user

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,726
5,134
113
Sandpoint, ID
That's a great way to have a bucket or other implement kill you!
The angle of the implement when raised can let it come off the back and on top of you!
 
  • Like
Reactions: 1 user

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,726
5,134
113
Sandpoint, ID
I think I have a pretty good grasp of how gravity and center-of-mass works.
Well hope you have a good life insurance policy too to go with all those other smarts!
 
  • Like
Reactions: 1 users

Fordtech86

Well-known member
Lifetime Member

Equipment
L3200
Aug 7, 2018
4,798
5,637
113
Pineville,LA
If it’s so dangerous, then why does Kubota recommend that I raise my bucket all the way and throw objects in it instead of scooping them off the ground. Makes no sense

0BD2DEAB-754A-4DD2-AE47-BD512ABF4624.jpeg
 
  • Like
  • Haha
Reactions: 5 users

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
9,923
4,068
113
Greensville,Ontario,Canada
Pretty sure I can get off the seat,walk(not run) to levers and gently pull them, then walk back and get onto seat BEFORE he can do it his way......
Then...
there's the HOW do you SECURE those latches when the new attachment is on the SSQA ......
 
  • Like
Reactions: 1 user

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,356
2,172
113
Bedford - VA
I think I have a pretty good grasp of how gravity and center-of-mass works.

Gravity is 100% constant - Center of mass varies by the millisecond!

You might just want to climb off the station and pull those handles.;)
 

Bearcatrp

Active member

Equipment
BX1880
Mar 28, 2023
376
193
43
Minnesota
Pretty sure I can get off the seat,walk(not run) to levers and gently pull them, then walk back and get onto seat BEFORE he can do it his way......
Then...
there's the HOW do you SECURE those latches when the new attachment is on the SSQA ......
Guess he uses the force!
 

GrizBota

Well-known member

Equipment
L3830HST/LA724, B2601/LA435/RCK54-32, RCR1872, CDI 66”grapple, pallet forks
Apr 26, 2023
1,132
722
113
Oregon
Gravity is 100% constant - Center of mass varies by the millisecond!

You might just want to climb off the station and pull those handles.;)
Gravity never takes a day off. Mother Nature always wins. I think I came up with that. Would suck if it became applicable to this situation.
 

NCL4701

Well-known member

Equipment
L4701, T2290, WC68, grapple, BB1572, Farmi W50R, Howes 500, 16kW IMD gen, WG24
Apr 27, 2020
2,538
3,623
113
Central Piedmont, NC
I don’t think my size relative to my tractor/loader size would allow that in my case. If it did, I wouldn’t do it with any implement I couldn’t catch hold without injury if it came back at me. I don’t have any of those.
 
  • Like
Reactions: 1 user