Found one on cl with 850hrs. Guy says its a 2008. My ? Is what years were these made, I can only find up to 03, it is in great shape, has folding r.o.p.s, no attachment asking 5500$. What would a new fel go for installed? Thanks
b7500?
- Thread starter line guy
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
They where only made 2000 to 2003 so not a 2008.
Your chances of finding a new Kubota FEL for it are near to impossible, you had a better chance of winning the lottery!
You might be able to get another brand of loader for it, your probably looking at about 3K.
Your chances of finding a new Kubota FEL for it are near to impossible, you had a better chance of winning the lottery!
You might be able to get another brand of loader for it, your probably looking at about 3K.
Wolfman, got a question. My brother bought a 2000 model new. It was rated @21hp but the tag on the block said it was 24hp. You ever heard of that before?
I know you couldn't choke it down. Even at low idle it would spin all 4 tires instead of killing the engine.
I know you couldn't choke it down. Even at low idle it would spin all 4 tires instead of killing the engine.
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Tractordata got it at only 21 too....
http://www.tractordata.com/farm-tractors/003/7/2/3724-kubota-b7500.html
It says on the tag 24HP? mmmm....that is interesting - no way it could have been switched?
What would be a good price for this tractor, with no attachements? Anything I should check for on this model that has had known problems? Any aftermarket sites I can check for a f.e.l thanks again for all the great info on this site.
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
that price is about right for that age/hour machine.
Personally - I would bring him $4500 in C-notes.......and he snubs nose, then have a few more handy......
but 45 benjies will make him think about it - and if you get it under $5000 you have done well - even at $5,500 that aint to awful bad. Tell us what happens!
Didn't cost but $8k brand new, $10.5 with loader, at least that's what my brother paid.
I would print the page off tractordata and show him they were never made in 08. That will likely throw him off him game and then like Hokie said hit him with the $4500. Might even start with $4k but whatever the case bring those hundo's. Something about a fat stack of green makes people go a little stupid for a few seconds and tend to make bad decisions.
I would print the page off tractordata and show him they were never made in 08. That will likely throw him off him game and then like Hokie said hit him with the $4500. Might even start with $4k but whatever the case bring those hundo's. Something about a fat stack of green makes people go a little stupid for a few seconds and tend to make bad decisions.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Yes it happens, sometimes when they start or run a production of a model they run short of the proper motor and they will substitute a higher HP model in it's place,
I had a 1968 Chevy pickup truck that instead of the standard P.U. motor, it had a corvette engine in it.
It's sort of like hitting the lottery!
Look at brands like Woods, Koyker, Westendorf, Bush hog.
BAP
Well-known member
Lifetime Member
Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
Line Guy, don't know where in upstate NY you are located, but here is a link to craigslist for a B7510HST with loader, mid mount mower, snowblower and cab that is located in St Albans Vermont. I don't know anything about it, just happen to see it listed there this morning.
http://burlington.craigslist.org/grq/5404568848.html
http://burlington.craigslist.org/grq/5404568848.html
alansz400
New member
Equipment
B7500. FEL, Piranha tooth bar, box scraper, post hole digger, 3 pt. bucket
i will ask here,can a bx series lx241 fel fit a b7500. Need to act fast if it does. thanks
Attachments
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
line guy, Confused???
You ask about a LX241, Yet show a picture of LA211 ???
And the real answer is no, not very easily.
You ask about a LX241, Yet show a picture of LA211 ???
And the real answer is no, not very easily.
missed out on that one, but going to look at another 2001 b7500 with loader this time with low hrs. In good condition, tires good.2nd owner. Was there an option for rear hydro, this one has a lever on right side, with hose going to back of tractor, is that factory?
missed out on that one, but going to look at another 2001 b7500 with loader this time with low hrs. In good condition, tires good.2nd owner. Was there an option for rear hydro, this one has a lever on right side, with hose going to back of tractor, is that factory?