Search results

I hadn’t but just confirmed all three lines and no change. Sent from my iPhone using Tapatalk

Long story short, was using the BX this weekend to do some back hoe work. Needed to reposition the tractor and flipped the seat around to find the FEL hydraulics basically stopped working. I increased the RPM up to 3500 and I could raise the bucket up very, very slowly but now can’t replicate...

I do autopay as well. So far no problems and 2 years in on the note. Sent from my iPhone using Tapatalk

Nice use of the extrusion. I sell that stuff for a living.

I have a 12" on my BX25D. If I was to do it again Id go 9". Dealer wants $350 plus freight for a 9" for my Landpride PD10. I guess I'll just be buying more concrete instead. The auger bits are way over priced.

I was actually wanting a white one but the decision maker said that the brown is what would make her happy. I've got 2400miles on it now with no improvement in fuel economy so looking forward to the 6-7k mile point.

Same here. I went 6 weeks ago to look at upgrading my 2003 2500 Cummins to an F-350 for the additional tow power. I was floored by the price. Ended up with a Caribou brown F-350 Lariat SRW. Love the truck minus the tiny 29 gallon fuel tank and the less than impressive fuel economy compared to...

I have about 6 of these in use both at my house and my off-grid cabin. For the money, no complaints at all. Over a year of use so far and all are still working.

Lot of kanji that I don't remember as it has been 16 years since I lived in Japan. Photo 1 left to right Knob 1 Auto...something Knob 2 3P Rotary and then settings Knob 3 Monroe...left, middle, right Knob 4 lifter arm...high and low Photo 2 Knob 1 ...auto depth something. Left is shallow...

You guys were correct. Turned out to be an extremely sensitive seat sensor. I adjusted the seat location back a few clicks and it solved it. Thanks.

I'll give that a shot tomorrow in the back yard. So far been a major downfall.

I have recently picked up a new BX25D. At about 2.5 hrs it wanted to shut off if the nose of the machine was lower than the rest of the unit. I figured the fuel intake was on the back of the tank and I must of been low on fuel. Fast forward to this weekend. I stopped by the gas stand and...

I picked up a new BX25D a few weeks ago and for the unit, 3-point lift bars, Landpride PD10 with 12" auger was $18,300. I added the Kubota insurance and took advantage of the 0% financing.

Exactly! That is why I went a bit more in debt. Although free money is hard to pass up. I'd rather keep it in my account then pay it to someone else.

Got to play around with it today.

For the money, they are good trailers. I have had 4 so far. I found that my most recent 12' purchase is doing better than some of my earlier models, but watch the wiring. Sadly they seem to take a quick shortcut when it comes to the wiring. I had to rewire my 16' a week after I bright it home in...

I thought about the grapple but I don't have enough work to justify it. I bought some Titan forks to lift up what brush I have for $169 so that will have to do. A grapple would be cool to have. I did spring for the 3point lift bars and post hole digger though as I am tired of digging holes by...

Thank you. Yeah been using my old Honda Rancher as a tractor for over a decade. Happy to not have to use a snow plow to move gravel. She wanted to pretend to drive.

Brought it home today.

They came in today. It was all I had to lift the box off the porch and put in the garage. Going tomorrow to pick up the BX25D. Can't wait.