Bought a used 2015 Kubota B3350 last August. Had no problems with the Regeneration system until the end of November, when it started to get cold. Had to do regen several times through December until January when the regen would not complete its function. Had to take it to Kubota to have it cleaned. It lasted a full 13 hours before the regen light came back on, I was not happy. I had read on this forum that people in the north who owned this model have had much problems, but those in the south had very little. I thought I would put a piece of cardboard in front of the radiator (1/2 covered) to warm up the engine a bit more and try that. It didn't get any warmer so tried covering 3/4 of the way. The temperature gauge went to 4 bars. I ran it about another 20 minutes and the regen light went out. I have not run it much sence then but am hoping this will cure the regen problems here in cold Idaho.
Any thoughts on this would be appreciated.
Any thoughts on this would be appreciated.