So here is my box scraper. Made from drops and leftovers from other projects.
first stage.3/16" x12x24 long for ends and 48" wide.
Upside down at this point.
Pipes welded in and square tube for mounting three point to. Nuts welded to square so i can offset it to either side.
Three point bits attatched. Will add some straps to tighten it up some. Grader cutting edges tomorrow and ordering tines on monday unless i find something suitable tomorrow. So far zero dollars and four hours.
Upside down at this point.
Pipes welded in and square tube for mounting three point to. Nuts welded to square so i can offset it to either side.
Three point bits attatched. Will add some straps to tighten it up some. Grader cutting edges tomorrow and ordering tines on monday unless i find something suitable tomorrow. So far zero dollars and four hours.