Search results

Replaced bucket control valve and forgot where the cylinder lines go Could someone please tell me whether the boom lift cylinder lines go to the inside or outside of the valve body Thanks all Dummy in PA

Have a B 2150w with a BF350-A loader it has a7 lines coming off the valve body Can"t get the bucket up/down lever to move at all Could someone direct me to a reasonable replacement? Anyone replaced one Thanks all Ken in PA

Does anyone have a good picture showing the directional valve and the pins associated with it? My manuals don,t show a clear pic of what side of pins the stops are on and I want to get it back together right Thanks any help appreciated

Woring on and getting my B2150 ready to plow and till. Changing fluids and messing with the 3 pt. Got a hydraulic filter a month or so ago They gave me the wrong one so I ordered on line Too far to drive. My question is can I remove the mid mount pto and just make a flat plate to bolt on in its...

Going to get a Pressure gauge from Bolt on Hooks they offer one of 3 fitting types What type would my B2150 withLA350 loader most likely have Thanks Ken

Could never get 3 point on 2150 to work Bought it used with bucket and hoe a while back Was thinking of adding cylinder to pick up 3 point to use a tiller Any ideas? Thanks Ken

Have a broken pivot ball on one of the two operating levers Ordered all 4 and want to replace all Wher can I find pics or directions to replace these got the unit used and it has needed TLC for a while Thanks Ken

My B2150 won't start Turned key to warm up ,when I go to start position, it clicks once and all dash lites go out Cleaned up ground frame connection and battery posts and charged battery Same thing Any help appreciated Ken

My B150 with 2250 hours has a black oily film on the outside of the exhaust stack on one side Was changing the oil and happened to notice it Thanks, Ken

My son borrowed my B2150 to plow our church parking lot. He says it will start right up , but shuts right off As its been real cold 0 degrees and lower with wind chill I'm thinking fuel somehow Any help on what and where to start looking and how to trouble shoot appreciated Thanks Fuel is...

Does any one know where I can find the hose lenghts and sizes for the 4520B hoe on a Kubota B2150? Also could I just hook the new hose to the old and pull it or is that just a pipe dream All help appreciated Thanks

Have my B2150 with hoe The three point has never worked since I owned it.Noticed lately the loader valve sticks and hangs up Can I use a valve with power beyond on the loader and by pass the control valve some way to get the 3 point bto work? Don't really need the hoe and would like to use this...

Morning all Does anyone have or know where to get a repair manual for these hoes? The valve body has two joy sticks The one works great but the other is a son of a gun They both are tied to two valves but the connectionarms are facing opposite ways from on side to other Is this normal Have the...

Got E-Mail Messicks is shipping my 2150 parts Am replacing the arm and set pin that moves the three point arms. Got the necessary gaskets and O rings Have the control valve off and apart except the pressure relief valve If I remove it can I just clean it and the valve body and just screw it...

Mounted a Caroni tiller today seemed to try to lift it a little as I was hooking up the arms Got it all hooked up now it won't lift at all when I pull the lever there is a very slight noise when I try This machine had a hoe on it when I got it late last year and the 3 point lift arms where clean...

Where do I get a 3 point hich kit for a B2150 HST? The backhoe is off and have got spring fever A few on E Bay but can,t find one for this tractor What are my options? Thanks

Pulled the old Filter off my 2150 HST (NAPA 1268 Gold )When I try installing the new Kubota 32701-37950 I cant get it to thread on When I compare the threads and hole size they look the same The difference is the Kubota filters threads are recessed down into the filter and the O ring sits higher...

What size dirt plow can I pull with a B2150 HST 4x4 ? thanks

Got the hydraulic oil drained( it looks lighter in color than any oil I've seen) Am going to let it set and see what happens Removed the mesh screen filter from the lower trans case and cleaned it with kerosene Should you be able to see thru it when done? Got to get new O rings for the filter...

Just got the hoe off my 2150 I bought the end of November Want to take thi s350-A loader off This loader has two sets of rods/stands with it I've watched the kubota videos and one set should go on the rear uprights where it fastens to sub frame I have no clue about the other set My intention is...