Been wondering. I have not moved it for fear of something breaking or not working right if I touch it.
What does this lever control?
- Thread starter chris142
- Start date
Read the operator manual carefully.
Especially understand the differential lock if you have one. You can damage stuff in a hurry if you don't fully understand things.
-just sayin...
Especially understand the differential lock if you have one. You can damage stuff in a hurry if you don't fully understand things.
-just sayin...
I didn t get one and have never owned a machine like this. Can you answer the question or not?
JimDeL
Well-known member
Lifetime Member
Equipment
BX2380; R4 tires; 54" MMM; FEL w Pirahna bar; Ballast Box; BXpanded skid plate.
First answer was correct. It locks/unlocks the loader controls.
You can get a manual online at Kubotabooks.
thanks. Not sure why I would want to unlock the controls but thx.
I do not live in an agriculture area and there's probably no tractor like mine within 100 miles or more .
My phone can't DL anything. I'm going to get a new one when I can afford it. I do not own a computer either so I'm stuck asking stupid questions and getting belittled on this forum for not knowing some things.
I didnt grow up around equipment like many here did.
Nobody is "belittling" you.
All you need to "know" as far as general operation is in the owners manual.
But if you need further help ... please keep asking questions. We are happy to help.
Chip on your shoulder notwithstanding...
chill out Dude.
First it is not a stupid question at all if you just don't know.
And the answer to this question could save your life.
The lock is to prevent someone from bumping the loader control stick causing the loader to move by 'accident'. This is handy if you're using the bucket to say hold a post while pouring concrete into the base or some-such task that may require the bucket to remain still while your getting on and off the tractor. I know I've caught my coat on the stick a couple times - luckily without causing any harm.
I don't think anyone replying to this post so far has intentionally tried to belittle you, though I must admit sometimes some replies read like they do. Anyways welcome to OTT and I'm glad your here.
And the answer to this question could save your life.
The lock is to prevent someone from bumping the loader control stick causing the loader to move by 'accident'. This is handy if you're using the bucket to say hold a post while pouring concrete into the base or some-such task that may require the bucket to remain still while your getting on and off the tractor. I know I've caught my coat on the stick a couple times - luckily without causing any harm.
I don't think anyone replying to this post so far has intentionally tried to belittle you, though I must admit sometimes some replies read like they do. Anyways welcome to OTT and I'm glad your here.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
It's unlocked for loader operation and you can lock it for unintentional loader control usage.
And no one is "picking on you", everyone is giving you great advice.
And no one is "picking on you", everyone is giving you great advice.
Thank you for this explanation
Something to keep in mind - this only locks the loader controls, not the loader itself, so theoretically if something failed with the hydraulics the loader could move even with the stick locked. A lot may think I’m being ridiculous, but I reccomend not getting under on on top of any attachments/loaders that are that not resting in the ground or supported by something mechanical such as jackstands. Someone in Michigan just died from his plow on his truck pinning him while he was under him. Just something to think about if the risk (while admittedly minor) is worth it.
I am also new to all this, only thing I had experience before the tractor was a small riding mower with. If you can get your hands on the manual I would definitely read it as it has good operating tips and provides lots of information. I would also really recommend reading some threads on here, most of the stuff I know about the tractor in terms of operating it is from this forum. There are hundreds of threads and posts on here that were and still are a big help for me to learn something. A good place to look is the what did you do on your Kubota today thread. Has a variety of different posts with lots of pictures and questions.
I am also new to all this, only thing I had experience before the tractor was a small riding mower with. If you can get your hands on the manual I would definitely read it as it has good operating tips and provides lots of information. I would also really recommend reading some threads on here, most of the stuff I know about the tractor in terms of operating it is from this forum. There are hundreds of threads and posts on here that were and still are a big help for me to learn something. A good place to look is the what did you do on your Kubota today thread. Has a variety of different posts with lots of pictures and questions.