What did you do to or on your Kubota today?

ctfjr

Well-known member
Lifetime Member

Equipment
L3800HST
Dec 7, 2009
1,686
1,877
113
central ct
Finally got some use out of the snowblower!

No, no snow, but it is adequate ballast for the big sections I'm dumping in the woods. Just have to be real careful with that boat hanging off the back. Fortunately no 'oops' yet. I just don't want to tear up the back yard more to get my ballast box.

We have had essentially zero snow so far this winter. I can't remember anything even close. Plenty of rain so the ground is soft.

6 s.jpg


Got a couple of good hours in today. Cut up a bunch of firewood sized logs with my new battery chainsaw. Used the grapple to haul a load of dead / starting to rot wood and drop it in the 'dry water course'. Seems a shame but anything on that trunk much over 16" (most of it) is going to get dumped in the woods.
 
  • Like
Reactions: 7 users

DustyRusty

Well-known member

Equipment
BX23S
Nov 8, 2015
4,956
3,695
113
North East CT
I used this one from Amazon it got good reviews and it was real east to setup.

Amazon Camera Link
I just went to Amazon, and they have a new model for the same price with a 10" monitor. It can also accommodate up to 4 cameras. I am thinking of this one for when I am driving my antique car because the mirrors on that car are so small. The nicest part is that it appears that it can easily be transferred from vehicle to vehicle. thanks Dusty
 
  • Like
Reactions: 1 users

L35

Active member

Equipment
L35/TL720/BT900/York rake/Valby chipper
Jun 13, 2010
404
233
43
CT
Finally got some use out of the snowblower!

No, no snow, but it is adequate ballast for the big sections I'm dumping in the woods. Just have to be real careful with that boat hanging off the back. Fortunately no 'oops' yet. I just don't want to tear up the back yard more to get my ballast box.

We have had essentially zero snow so far this winter. I can't remember anything even close. Plenty of rain so the ground is soft.

View attachment 94921

Got a couple of good hours in today. Cut up a bunch of firewood sized logs with my new battery chainsaw. Used the grapple to haul a load of dead / starting to rot wood and drop it in the 'dry water course'. Seems a shame but anything on that trunk much over 16" (most of it) is going to get dumped in the woods.
Is it all punky?
 

ctfjr

Well-known member
Lifetime Member

Equipment
L3800HST
Dec 7, 2009
1,686
1,877
113
central ct
Is it all punky?
No, quite the opposite. Only the top 20' or so of one of the big oaks was ratty. I'm guessing, about 4-5 years ago we had a lightning hit on that side of the house and that's what did it. I really don't know what killed 6 or 7 really big oaks a couple of years ago.
I spent a couple of hours cutting and hauling. More tomorrow.
 

Rdrcr

Well-known member
Lifetime Member

Equipment
L2501 w/ S2T Turbo Kit = 35 PTO HP (Current), B2601 (Sold)
May 7, 2021
626
645
93
WA
Not today....but, last week. I finally dyno'd my L2501 Turbo!


Mike
 
  • Like
  • Wow
Reactions: 3 users

matt-m

Well-known member

Equipment
2022 B2601
Mar 17, 2022
49
272
53
Columbus, IN
Finished some fab projects:
- basket and dolly for ballast box
- multipurpose 3pnt frame
- bolt on big basket
- platform for stacking feed bags and will be base for tank on a sprayer project

20230131_182638.jpg

20230131_183455.jpg

20230131_193756.jpg

20230131_194017.jpg

20230131_195301.jpg
 
  • Like
Reactions: 18 users

Bri-Guy-GA

Active member

Equipment
Kubota BX1880
Sep 10, 2020
146
91
28
Villa Rica, GA
  • Like
Reactions: 1 user

ctfjr

Well-known member
Lifetime Member

Equipment
L3800HST
Dec 7, 2009
1,686
1,877
113
central ct
Is it all punky?
Here is a pic of a trunk cut. It's about 50' from the base. These pieces are too large for me to handle when cut to 24-30" long pieces so I cut them to about 6' and dump them in the woods. Ya gotta love a grapple!

7.jpg
 
  • Like
Reactions: 4 users

ajschnitzelbank

Well-known member
Lifetime Member

Equipment
L4701, BH92, Frost Bite grapple, Logosol M8 mill, Stihl MS661
Aug 24, 2021
154
345
63
Rensselaer County NY
Here is a pic of a trunk cut. It's about 50' from the base. These pieces are too large for me to handle when cut to 24-30" long pieces so I cut them to about 6' and dump them in the woods. Ya gotta love a grapple!

View attachment 95003
Dump them in the woods?! All I see are BTUs! Haha.
 
  • Like
Reactions: 2 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25TLB
Feb 9, 2021
4,069
4,624
113
NW Montana
Beggars can't be choosers! Some neighbors watched my dogs this past weekend, stopping by four times a day for three days. They repeatedly drove over 4" to 5" of snow on the asphalt driveway and parking areas during their visits. It started to snow the morning I left so I knew I was going to be dealing with the aftermath for weeks to come.

Picture from yesterday but more of the same today.

mx6000_01_31_23.jpg
 
  • Like
  • Love
Reactions: 5 users

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
2,854
3,102
113
Wind Gap, PA
Broken water service dig today didn't go as planned. We tried pulling the old line with tractor then 13 ton dump truck. No budge. Started digging back to the foundation, which, was actually a slabbed room and found a cistern. Change in plans to reroute the line out the side of the house next week. We did manage to save the Japanese thread leaf maple. At least I'll have my first job with the new mini-ex then.

I put one of the guys on the machine to start the day...he had some fun. I do really enjoy seeing them have a bit of fun on a hard job.

start

H4_NEW340-1.JPG


Young guy digging...

H4_NEW340-2.JPG


H4_NEW340-3.JPG


Attempted Cable pull

H4_NEW340-5.JPG


More digging and found this:

H4_NEW340-8.JPG


this:

H4_NEW340-7.JPG


and a pit viper 😁

H4_NEW340-snake.JPG
 
  • Like
  • Wow
Reactions: 6 users

ken erickson

Well-known member

Equipment
B7100 hst, 2650 front mount snowblower, L2501 hst qa loader
Nov 21, 2010
976
1,486
93
Waupaca Wisconsin
I was able to get 3 hours of seat time yesterday playing around with my tractor clearing snow off some of my two track trails. It was more of a nice tractor ride in mid-winter central Wisconsin than a real work day! Beautiful cool clear crisp air (15- 22 degrees) with sunny skies.

I can say that my L2501 with front bucket, no edge tamers, and too small box blade along with no chains and R4 tires is not the ideal snow removal machine for my trails. Had fun anyways! A good friend came with that enjoys cross county skiing and was able to hit the trails and log about 3 1/2 miles according to her smart phone.

Screen Shot 2023-02-02 at 7.01.39 AM.jpeg
 
  • Like
Reactions: 3 users

forky

Active member

Equipment
L2501 HST 4X4 8N
Feb 23, 2021
249
247
43
Wisconsin
Good job Ken! Nice to have access to the property in the dead of winter for sure. I have the basic same set up except for loaded R1's. I do have a set of heavy- duty chains for the 8N but haven't tried them for fit yet on the L2501 because they just aren't needed this winter so far.
Hoping they will work if needed when you price a new set of chains. Cold for both of us tonight with the extreme cold again. Cross your fingers it's the last of brutal temps.
 
  • Like
Reactions: 1 user

ken erickson

Well-known member

Equipment
B7100 hst, 2650 front mount snowblower, L2501 hst qa loader
Nov 21, 2010
976
1,486
93
Waupaca Wisconsin
Good job Ken! Nice to have access to the property in the dead of winter for sure. I have the basic same set up except for loaded R1's. I do have a set of heavy- duty chains for the 8N but haven't tried them for fit yet on the L2501 because they just aren't needed this winter so far.
Hoping they will work if needed when you price a new set of chains. Cold for both of us tonight with the extreme cold again. Cross your fingers it's the last of brutal temps.
Thanks for the good words! I did forget to mention that I have my rear r4's filled also. They just do not preform well in the deeper powder snow.
It is too late in the season for me to look for a better solution but I have two thoughts, since I have a third function perhaps a loader mounted snow blade. The other option is the tried and true back blade.

Enjoy your land and tractor, and stay warm! It looks like after tonight and tomorrow morning it will reach decent daytime temps again for this time of year.
 
  • Like
Reactions: 1 users

L35

Active member

Equipment
L35/TL720/BT900/York rake/Valby chipper
Jun 13, 2010
404
233
43
CT
Here is a pic of a trunk cut. It's about 50' from the base. These pieces are too large for me to handle when cut to 24-30" long pieces so I cut them to about 6' and dump them in the woods. Ya gotta love a grapple!

View attachment 95003
Oh man that’s nice oak! You don’t do firewood? I can bring by my trailer by and you can dump that big stuff on there instead if u like ;)
 

ctfjr

Well-known member
Lifetime Member

Equipment
L3800HST
Dec 7, 2009
1,686
1,877
113
central ct
Oh man that’s nice oak! You don’t do firewood? I can bring by my trailer by and you can dump that big stuff on there instead if u like ;)
sure - there is a load of it already gone, not retrievable in the woods. I still have about 100 linear feet of trunk to cut. I'll cut them to 5-6'. That may be the limit for my fel near the base (~3' diameter). When the weather warms up on Sunday I'll be back at it.
PM me when you want to come by. I'm in Cheshire.
 
  • Like
Reactions: 1 user