Stalling when trying to accelerate

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
9,669
3,916
113
Greensville,Ontario,Canada
possible reasons I can think are...

parking brake kinda on ?
crud in tank ?
plugged fuel filters ?
too high a gear ?
too heavy a load ?
plugged air filter ?
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,269
2,104
113
Bedford - VA
I think Jay covered it well!!!

SO tell us WHAT on the list have to you ........ checked !
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,286
4,852
113
Sandpoint, ID
HST?
Does it want to die when you step on the pedal?
Does it do it forwards or backwards

If it is, then seat switch, HST pedal switch, or OPC could be an issue.

If it's a DT (gear) The seat switch or OPC could be causing an issue too.

To add to GreenvilleJay's list :
Water in the seperator.
 
  • Like
Reactions: 1 user

Charles Dortenzio

New member

Equipment
L2501
May 19, 2023
4
0
1
Cottreville Twp
HST?
Does it want to die when you step on the pedal?
Does it do it forwards or backwards

If it is, then seat switch, HST pedal switch, or OPC could be an issue.

If it's a DT (gear) The seat switch or OPC could be causing an issue too.

To add to GreenvilleJay's list :
Water in the seperator.
I have changed the filter and fuel, it ran very well for about two hours then started doing the same thing
possible reasons I can think are...

parking brake kinda on ?
crud in tank ?
plugged fuel filters ?
too high a gear ?
too heavy a load ?
plugged air filter ?
I have changed the filter and fuel, it ran very well for about two hours then started doing the same thing
 

Workerbee

Active member

Equipment
Zd21
Mar 1, 2020
155
36
28
MN
If as you say, that the filter and fuel being changed made it run well for a couple hours, Id think theres crud or debris in your fuel line from the tank to the filter.
 

Charles Dortenzio

New member

Equipment
L2501
May 19, 2023
4
0
1
Cottreville Twp
I have changed the filter and fuel, it ran very well for about two hours then started doing the same thing
HST?
Does it want to die when you step on the pedal?
Does it do it forwards or backwards

If it is, then seat switch, HST pedal switch, or OPC could be an issue.

If it's a DT (gear) The seat switch or OPC could be causing an issue too.

To add to GreenvilleJay's list :
Water in the seperator.
HST?
Does it want to die when you step on the pedal?
Does it do it forwards or backwards

If it is, then seat switch, HST pedal switch, or OPC could be an issue.

If it's a DT (gear) The seat switch or OPC could be causing an issue too.

To add to GreenvilleJay's list :
Water in the seperator.
yes it stalls out forward & backwards
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,269
2,104
113
Bedford - VA
I would "look" in the fuel tank and see if debris is blocking the pathway.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,286
4,852
113
Sandpoint, ID
Like I said before it sounds more like an HST pedal switch, seat switch, or OPC issue.
If its stalling consistently when you push the pedal to move it's not a fuel issue.
If you are using it and it starts to bog down then it's more likely a fuel issue.

Just to clarify:
When you say it stalls, does it bog down or does the engine shut off completely?
When sitting still can you move the accelerator lever on the dash up and get rpms up?
 
  • Like
Reactions: 1 user

ayak

Well-known member
Lifetime Member

Equipment
L3301 HST
Feb 16, 2018
568
719
93
WV
Check out post #9 here (and 21 has a pic of the broken wire that caused this on mine)