L 35 wont start with key switch

Aaron Smart

New member
Dec 3, 2013
4
0
0
greenwood sc us
new guy here just trying to firgue out why my l 35 wont start with key can jump the starter replaced ground wire to battery have power at switch lost any help would be great.
 

BAP

Well-known member
Lifetime Member

Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
Dec 31, 2012
2,543
677
113
New Hampshire
Sounds like a bad solenoid. Check for power coming down from the key switch to the selonoid. If there is, then the key switch is working.
 

Aaron Smart

New member
Dec 3, 2013
4
0
0
greenwood sc us
well just got back from having starter test and its good so now where to look for grounds have all ready replaced battery ground and my electric is not that good
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,941
5,292
113
Sandpoint, ID
Are you getting power (when in start pos.) on the start wire out of the ignition switch)?
If you are and it's not going to the starter then it's being stopped at a safety switch (like clutch or PTO), or has a break in the wire.
 

Aaron Smart

New member
Dec 3, 2013
4
0
0
greenwood sc us
well put the hole thing back together today had to use jump it off used it then went to cut off but tried to use key to start to see if starter turned over and it did used kill switch then started right back up so there is a wire some where almost broke that is what im thinking now thanks for the help.:)