Kubota LA481 Loader....I cannot find the replacement parts for it

[debbieloveskenneth@gmail.]

The middle valve of this is leaking oil. The plastic rings were replaced on it and it's still leaking. A man here in Arkansas wants around $500 labor to fix it after I purchase the rebuilt kit. I can't find the rebuilt kit...he is saying it's too old for them to make anymore. He pointed out an entire value to purchase but it was over $1100. That would put me at $1700-1800 with labor and tax on the part. Can anyone direct me to a website with a rebuild kit for this valve?

 

[edritchey]

https://messicks.com/part/7J240-61010?vendorcode=KU

 

[debbieloveskenneth@gmail.]

That's $1500 for what you uploaded plus $500 in labor....I want the rebuilt kit and not the actual valve. The rebuilt kit is supposedly way cheaper...maybe less than $200

 

[D2Cat]

The rebuild kit probably only includes "O" rings. Everything else in a valve like that is precise machined and nothing to fix. You can probably get all the "O" rings at a hydraulic repair shop at very little cost.

 

[debbieloveskenneth@gmail.]

Like I was saying, the plastic rings were replaced and it still leaks. I called Kubota today and they gave me this below. The kit is still made for the rebuilt kit but it's called a detent kit. I am about to order it. Thanks for the help.

De Tent Kit: $155.69
Part #75536-65400

 

[TheOldHokie]

Like I was saying, the plastic rings were replaced and it still leaks. I called Kubota today and they gave me this below. The kit is still made for the rebuilt kit but it's called a detent kit. I am about to order it. Thanks for the help.

De Tent Kit: $155.69
Part #75536-65400

The detent kit goes on the back of the valve. It isn't going to fix a leak anywhere else. $500 labor to install seals is insane.

Post a picture showing the entire valve and how it's mounted. Plenty of valves that could potentially work and for a lot less than $1500.

Dan

 

[debbieloveskenneth@gmail.]

The only other that I've found is a $11xx...is there not a rebuilt kit for this part?

 

[TheOldHokie]

I

The only other that I've found is a $11xx...is there not a rebuilt kit for this part?

Don't know about a rebuild kit but you can put a new valve on that loader forc$250.

Dan

 

[debbieloveskenneth@gmail.]

More pictures..

 

[debbieloveskenneth@gmail.]

I

Don't know about a rebuild kit but you can put a new valve on that loader forc$250.

Dan

Is that the valve cost or labor cost or both? Can you send me a link to the valve?

 

[debbieloveskenneth@gmail.]

Last of the pictures

 

[TheOldHokie]

Is that the valve cost or labor cost or both? Can you send me a link to the valve?

Cost for the valve..

Dan

 

[PoTreeBoy]

Messick's shows the seal parts in stock. You can probably get them from your dealer. I'm assuming it's leaking around the spool stem?

 

[TheOldHokie]

Is that the valve cost or labor cost or both? Can you send me a link to the valve?

You can install the valve yourself. Disconnect the 7 hoses and unbolt the old one along with the joystick. Put them aside. Bolt the new valve on - you might have to drill two new holes in the plate. Hook up the hoses - you are done.

There are lots of valves you could use. This is just one.

Hydraulic Directional Control Valve for Tractor Loader w/ Joystick, 2 Spool (Single Float Spool Optional), 11 GPM

This Monoblock Hydraulic Directional Control Valve uses a Joystick, 2 Spools and has a capacity of 11 GPM. These valves are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.

summit-hydraulics.com

Dan

 

[debbieloveskenneth@gmail.]

Thank you so much....this is a much cheaper fix.

 

[TheOldHokie]

Thank you so much....this is a much cheaper fix.

I just checked the hydraulic flow on your tractor - you would need the 21 GPM version of that valve. Its just a little more expensive amd don't forget to order the power beyond sleeve.

Edit: Crap - I just noticed the 21 GPM valve is not available with float. KTime to do a little more looking

Hydraulic Directional Control Valve for Tractor Loader w/ Joystick, 2 Spool, 21 GPM

The Hydraulic Directional Control Valve for Tractor Loader w/ Joystick, 2 Spool, 21 GPM are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.

summit-hydraulics.com

Power Beyond Adapter Sleeve for P80G Series Summit Monoblock Valves

Power Beyond Adapter Sleeve for P80G Series Summit Monoblock Valves

summit-hydraulics.com

 

[TheOldHokie]

I just checked the hydraulic flow on your tractor - you would need the 21 GPM version of that valve. Its just a little more expensive amd don't forget to order the power beyond sleeve.

Edit: Crap - I just noticed the 21 GPM valve is not available with float. KTime to do a little more looking

Hydraulic Directional Control Valve for Tractor Loader w/ Joystick, 2 Spool, 21 GPM

The Hydraulic Directional Control Valve for Tractor Loader w/ Joystick, 2 Spool, 21 GPM are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.

summit-hydraulics.com

Power Beyond Adapter Sleeve for P80G Series Summit Monoblock Valves

Power Beyond Adapter Sleeve for P80G Series Summit Monoblock Valves

summit-hydraulics.com

Heres a 25 GPM valve:

Directional Control Valves | Hydraulic Valves | Hydraulics | www.surpluscenter.com

Directional Control Valves,Hydraulic Valves,Hydraulics, PRINCE MONOBLOCK VALVE Brand new PRINCE. For control of cylinders, motors, etc. Open center,

www.surpluscenter.com

Dan

 

[debbieloveskenneth@gmail.]

I just checked the hydraulic flow on your tractor - you would need the 21 GPM version of that valve. Its just a little more expensive amd don't forget to order the power beyond sleeve.

Edit: Crap - I just noticed the 21 GPM valve is not available with float. KTime to do a little more looking

Hydraulic Directional Control Valve for Tractor Loader w/ Joystick, 2 Spool, 21 GPM

The Hydraulic Directional Control Valve for Tractor Loader w/ Joystick, 2 Spool, 21 GPM are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.

summit-hydraulics.com

Power Beyond Adapter Sleeve for P80G Series Summit Monoblock Valves

Power Beyond Adapter Sleeve for P80G Series Summit Monoblock Valves

summit-hydraulics.com

So any idea where to look at?

 

[TheOldHokie]

So any idea where to look at?

Crap - somehow I got this thread confused with another. You have an L3300 and flow on it is only 7 GPM. The $250 valve from Summit will work fine.

Dan

 

[debbieloveskenneth@gmail.]

Thank you so much. My honey says he can put it in but he can't pick out the right part.