Not really off-topic, but I found a few fake tractors that sneaked into this forum 
There are probably more hidden that escaped the sharp eyes of the moderators
Who found others?
Kubot
www.orangetractortalks.com
Kubata
www.orangetractortalks.com
www.orangetractortalks.com
www.orangetractortalks.com
www.orangetractortalks.com
www.orangetractortalks.com
www.orangetractortalks.com
www.orangetractortalks.com
www.orangetractortalks.com
www.orangetractortalks.com
Kibota
www.orangetractortalks.com
www.orangetractortalks.com
www.orangetractortalks.com
www.orangetractortalks.com
www.orangetractortalks.com
Kabata
www.orangetractortalks.com
Kabuto
www.orangetractortalks.com
www.orangetractortalks.com
www.orangetractortalks.com
www.orangetractortalks.com
www.orangetractortalks.com
www.orangetractortalks.com
www.orangetractortalks.com
www.orangetractortalks.com
There are probably more hidden that escaped the sharp eyes of the moderators
Who found others?
Kubot
B01 for me?
Hello everyone, new member here and new soon-to-be tractor owner. I'm currently shopping, having some analysis paralysis. I've read a lot on here already, and think I know what I'm looking for but would love affirmation or further thoughts before I pull the trigger on anything. I live on about...

Kubata
Bush Hog for Kubota L2201
I recently got the Kubota L2201 2wd and it came with a junk 4' bush hog. I would like to go bigger on the bush hog, but have not been able to find much on what it can handle. What is the largest bush hog the Kubata L2201 can handle?

over pressuring filled tires
Hey Orange owners, New to the tractor. I have a BX1500. Recently had rear tires filled with rim guard. Used a few hrs w/out issue but next morning bead had failed and rim guard all over floor. Brought back to dealer who told me to "really pressure" the tire to ensure the bead holds. Says its...

V1305 Engine rebuild
I recently had my v1305 diesel engine rebuilt. It was a pre 1997 model and aftermarket parts were used in the rebuild as no one could look up the old serial number to find if Kubata even had rebuild parts. I was also told that this pre 1997 engine could not be rebuilt after the failure. After...

Upgrade from 2501?
I am sure this thread has been written several times, but currently looking at an upgrade. I have see threads for L3560 vs MX4800 and trying to choose between those too. If that wasn't tough enough, with the 3560LE I am really struggling now. You can get a CAB on the 3560 for similiar price as...

Kubota Sunshine L1-185
Hello guys.. I've recently purchased a Kubota L1-185 from japan, I'm in New Zealand and cant find service manuals or operating manuals. Will any of you be able to help me. Thanks in advance.

front wheel
Need a front wheel for a Kubata model L 175. This is a 10" wheel, the tire size is 20.5 x 8.0-10

L3901 cold weather start
Thought I would share my cool morning start of my L3901DT. It was about 20°F when I started the tractor today after it being 5°F for the low. Glow plug light didn't stay on for very long, cranked it and it light right up. Did run a little rough at first. It idled up on its own for a little...

Price L2900
I have been searching for compact 4wd for a few months. Needless to say I have seen a broad spectrum for prices and conditions of the compact market. I was beginning to think that purchasing new was the way to go. After a few visits to several Kubota dealers it was much like buying a car. Long...

Kubota Online
A week ago our hard drive failed and we lost everything. I had shop manuals and owners manuals and the parts lookup downloaded and no longer needed to visit Kubota's website. I was able to retrieve the owners and shop manuals but not the parts lookup. Can someone please send me a clean link or...

Kibota
M8200
I'm helping a friend, his Kibota M8200 2wd is leaking hydraulic oil out of a vent tube in the clutch/ transmission area. Could someone point me in the right direction?

Third B7100 clutch in 4 years!?!?
The braces in the very middle of the B2 19 subframe that go up to the trans tunnel box are a pretty thin piece of metal that you could easily add yourself to whatever existing subframe you have. it sounds to me like you have a pretty darn good starting point. Post some pictures if you get a...

Valve Adjustment Question - Reason for it?
I was reading another thread regarding valve adjusting and checking. This has been on my mind recently since I never did it on my tractors and they are 20 and 19 years old. For some reason I had thought that Valve adjustment was important because if you neglected it, you could end up burning a...

B6000e knocking
Hi! I have a B6000e and when I start it, I heard some knocking for the first 10secondes, after that, it's purr like a cat, :) no knocking. Is it normal for that little diesel? Thank.

Tiller Help
I am attempting to repair a tiller. There is no information anywhere on it. No stickers or tags. It appears to be a jdm kubota, yanmar or such. The tilling holder(tube) measures 56 inches between bearings. I have replaced the bearings and seals, also the tines. Now i need a chain or a...

Kabata
Kabata rim paint
what is a spray can paint that color matches the kubota beige rims okay? rims starting to peel and rust and want to fix it but need a paint

Kabuto
Help identify the model and value of this serial number
Hello, I'm new here. Looking at buying a property and can get a Kabuto tractor written into the offer. Wondering if someone can help me identify the model and value of this tractor. In Ontario, Canada if it matters. Thanks!

Help identify the model and value of this serial number
Hello, I'm new here. Looking at buying a property and can get a Kabuto tractor written into the offer. Wondering if someone can help me identify the model and value of this tractor. In Ontario, Canada if it matters. Thanks!

Recs on ballast
Good morning all. Had a bit of a "oh crap" moment a few days back and need some advice please, Have 10 hours on new L6060 ( beet juice filled tires). Took delivery of a shed kit and helped the driver lift a load of lumber (about 900lbs) that was on top of my order with my pallet forks. Tractor...

What size dump trailer to haul a new B2650 w/loader and backhoe
I'm getting ready to purchase my first Kabuto Tractor and I need help sizing a dump trailer to haul my new baby. Can anyone tell me how long a new B2650 is with loader and backhoe attached? Would it fit in a 14 ft dump trailer or will I need a 16 ft trailer (of course I'm assuming it will fit...

Newbie needing help
I just bought a 2007 Kabuto b3030 with bucket and backhoe I'm wondering how I could get extra remotes to the rear of my Kabuto without buying a kit looking possibly for two remotes even if I need to mount the extra joysticks on my rops but I like to be able to have it to where I can still run my...

3 bond on oil pan
I brought this today at my Kabuto dealership it had no directions how to use it but I don't know cure time. Is 13 hours enough any help will be greatly appreciated and it's on an oil pan

Marine diesel - can't find head decompression lever
I have a 3 cylinder 25 HP Marine kabuto diesel. This motor is new to me and I am not sure what the actually motor style / name is so please bare with me. 1) My question I hope someone can answer is - Where is the decompression button / lever that releases the head pressure located? 2) Where...

Marine diesel - can't find head decompression lever
I have a 3 cylinder 25 HP Marine kabuto diesel. This motor is new to me and I am not sure what the actually motor style / name is so please bare with me. 1) My question I hope someone can answer is - Where is the decompression button / lever that releases the head pressure located? 2) Where...
