We have loads of leaves and pine needles. I had been using clamp-on debris forks but they didn't work that that great. The tines were too big to penetrate the debris piles well.
I fabricated this one using a SSQA back plate, 3/4" & 1" black pipe, 3/4" x 36" concrete form stakes for the tines and some 4ga. livestock fencing. The tines bolt in so they can be replaced. Tines are spaced 5" on center.
No drawings or sketches, just cut and notched pipe and fitted to what looked right.
Just finished up loading 24cy of leaves and needles. Works great!
I fabricated this one using a SSQA back plate, 3/4" & 1" black pipe, 3/4" x 36" concrete form stakes for the tines and some 4ga. livestock fencing. The tines bolt in so they can be replaced. Tines are spaced 5" on center.
No drawings or sketches, just cut and notched pipe and fitted to what looked right.
Just finished up loading 24cy of leaves and needles. Works great!