3-Point Stabilizers?

[blksn8k]

I need to replace the factory 3-point stabilizer turnbuckles on my '96 L2900 and would like to know if I should stick with the turnbuckles or swap them for a chain setup? Which is the best or is there something better than either of those?

 

[85Hokie]

I need to replace the factory 3-point stabilizer turnbuckles on my '96 L2900 and would like to know if I should stick with the turnbuckles or swap them for a chain setup? Which is the best or is there something better than either of those?

Best thing to do with those turnbuckles.....mmm.....lets see, do you have a large pond near by???? And negative on the chains.....But I would do chains before turnbuckles.....

but here is whatcha do.......

give this man a PM - and then be patient and wait - he is worth every penny!

talk to hodge :

http://www.orangetractortalks.com/forums/member.php?u=3650

 

[Bulldog]

For sure loose the turn buckles and switch over to telescopic stabilizers. Worth every penny and then some. If Hodge can't help you can order a set for a L series that has them as standard. The ones I have on my L3000 were for a L4300, perfect swap. If you've never used them you don't even realize how much easier they make switching implements..

 

[Mike9]

Would L stabilizers fit on a B series?

 

[hodge]

Would L stabilizers fit on a B series?

No- they mount differently, and they are not the same length.

 

[David Cockey]

Telescopic stabilizers are standard on B2650 and B3350, and optional on B3350SU for $208. Visit a Kubota dealer and have a look at the links on a B2650/3350. If they look like they would fit you B then talk to a salesman about the "wholegoods" price for the kit for installing them on a B3350SU.

Otherwise talk to hodge about making a set for your tractor.

 

[eddiebob]

No- they mount differently, and they are not the same length.

Just go ahead and get a set from Hodge! Ed B

 

[RonBoyBX25D]

Just go ahead and get a set from Hodge! Ed B

X2, love my set!

 

[Mike9]

Been in contact

 

[tmwfreeman]

I just ordered a set from Mark Hodge for an L3000. There a better design than stock and cost less too. Can't wait to get them

 

[RonBoyBX25D]

I just ordered a set from Mark Hodge for an L3000. There a better design than stock and cost less too. Can't wait to get them

Nice to hear they will work for you, won't regret the purchase for sure.

 

[albertcaballero]

Hodge x3. I love my set. Super nice guy..