Search results

  1. R

    G2160 Armrest

    Not sure if already out there, we just got a used G2160, wanted armrest for the seat. found same ones that I put on my BX1860 will work atleast on mine. So if you have a Kubota seat that has the correct 6 holes in the back of the seat. See my pics, the B7358 kit worked on mine, I had to change...
  2. R

    Hydraulic cylinders & valve, Kubota LA1065A

    believe sold, just need to package up. thanks for looking. randy
  3. R

    Hydraulic cylinders and hydraulic coupler LA435

    For Sale: 2 loader lift cylinders, 2 loader bucket cylinders & coupler assemble from a LA435 loader. Could be used for other uses. Lift I believe are 7J065-63010 or 7J065-63110, bucket I believe are 7J065-64010 or 7J065-64110. Both have pin holes are 1” diameter, center on center-extended length...
  4. R

    Hydraulic cylinders & valve, Kubota LA1065A

    For Sale: 2 loader lift cylinders, 2 loader bucket cylinders & valve assemble from a LA1065A loader. Could be used for other uses. Lift I believe are 7J275-63050, pin holes are 1 3/16” diameter, center on center-extended length 50 ¼” retracted 30 5/8” rod dia is 1 3/8” tube OD is 2 ¾” guessing 2...
  5. R

    (SOLD) G2160 PART OUT SOLD

    yes on the hitch and cover, i will PM you to work out the details. thank you
  6. R

    (SOLD) G2160 PART OUT SOLD

    yes, we are interested. wondering if you can get a pic of the hitch and rear cover, just to make sure we are both on same page, also wondering if you have a good head light lens that you are willing to separate from the hood assy? if so, pic of that also. thank you
  7. R

    (SOLD) G2160 PART OUT SOLD

    i w i will get w/my son and find out if he wants to go this way instead, thank you
  8. R

    (SOLD) G2160 PART OUT SOLD

    how much for the 3 pc of the drawbar hitch that bolts to the 2 sides of the frame?
  9. R

    For Sale, RCK48R-21G deck shell, GCK500-DS bagger parts

    took off GCK500-DS bagger and RCK48R-21G deck. deck has 2 spindles out, and bad gearbox. bagger has some hole is in material, have basket assy and frame. deck shell $125, drive shaft $175, bagger & frame $125. see anything else you what priced to buy separately, let me know, have pulleys...
  10. R

    G2160 steering issue

    got the new used deck, removed the RCK48R-DS deck and grass catcher, found a 60". got it all together today. runs great.
  11. R

    G2160 steering issue

    set of needle thrust washer bearing under the spindles at the axle, new wheel bearings, steers like a dream. just enough room for the snap ring on the right hand side and get the new steer arm on top on the left.
  12. R

    G2160 steering issue

    back in the early 80's, we had a our Case Lawn & Garden rep point out to use the torrington needle thrust brg on the (at the time) Case 200 and 400 series. it was the cheap mans power steering if you had snowblower on them. we did that to my father in laws 3016 when he bought new in 92...
  13. R

    G2160 steering issue

    yes it was. i dont believe the front spindles where ever greased since new. we had to pound out the right hand one w/a sledge hammer. got them out, got rid of the dried up dirty grease, cleaned the zerks and put back together. steers like a dream. now looking for some needle thrust bearing...
  14. R

    G2160 steering issue

    I recently purchased a used G2160-R48S that I knew had a steering issue. it will turn 15 degrees left or right just fine. after that it turns really hard. i know i will have to diagnose further, but to start, am i looking at a power steering unit under the steering wheel or the rack and pinion...
  15. R

    i recently purchased a used G2160-R48S that i knew had a steering issue. it will turn 15...

    i recently purchased a used G2160-R48S that i knew had a steering issue. it will turn 15 degrees left or right just fine. after that it turns really hard. i know i will have to diagnose further, but to start, am i looking at a power steering unit under the steering wheel or the rack and...
  16. R

    SOLD: Rolling A Frame Hoist

    Re: For Sale: Rolling A Frame Hoist sold the A Frame, thanks for looking
  17. R

    3 pt

    have you checked w/your local dealer? i believe the kit you want is L3961, 3point linkage kit. i believe it sells for about $525 plus freight coming in for about $50. if you cant get, PM me i we can discuss.
  18. R

    SOLD: Rolling A Frame Hoist

    REDUCED Rolling A Frame gantry hoist w/trolley and chain hoist. Trolley is rated at 1/2 ton. Continuous chain, chain hoist is rated at 1 ton. It is 8' between the legs. The width is 5' between the wheels. 4" steel wheels. Bottom of trolley eye to ground is 98 1/2". Trolley will travel 66" side...
  19. R

    3rd function/diverter/remotes?

    depending on your tractor/loader, Kubota / Landpride make 3rd function kits that are relatively reasonable, and very clean and compressed. an electric hydr valve is bolted on (near or on) the loader cross bar. the hoses from the valve to the bucket are plumbed into the valve, a set of hoses...