Search results

Actually it was not a big hammer at all but the punch was a huge one so it would not slip off the shut off slider. :D All is well, the video above is of the engine running after the pump swap. :)

I had to get this thing running today so I made my mind up that if the pump was damaged it was just damaged as I had another known good working pump on hand. Clearly this pump i removed is in need of a major service or maybe something was broke inside of it. I did run this motor years back for a...

I was not aware that I could take that little plate off and remove the sliding portion of the fuel shut off. I also had no idea what may drop down into the engine if I attempted to remove those parts with the pump still in the engine block. It took some major pounding to get the shut off slide...

Well I was not sure what approach to take so I used a huge punch and hammer to drive the fuel shut off in enough to get the pump out. the pump looks great but something is for sure not right inside with the shutoff stuck like it is. I went ahead and installed the other pump and the little D1105T...

How does one go about removing the injection pump when the fuel shut off will not push in? Without pushing in the fuel shut off there is no way the pump will come out of the engine block. Any advice would be great. Also, The engine I am removing the pump from is a D1105T and the pump I have to...

I am going to pick up a lower hour non running zd28 mower in the morning. I will have to move it about 20ft then pull it up onto my trailer. How can you do this safely without damaging the hydro static motors or pump? I did a google search trying to find out if there is a hydraulic bypass for...

Well, little did i know that the oil pressure switch had to be connected in order to keep the fuel pump running. I kind of figured that a mower would lack such features but this kubota wasn't lacking it. So if low oil pressure is sensed the fuel pump shuts off. I ended up calling the dealer to...

Well, I buttoned up the engine swap late last night by building a new muffler system with the original unit off the kubota engine. I have found some kind of issue which I can not figure out. It seems the fuel pump runs then shuts off after a few moments. I do believe that the carb is filling...

This ZG227 has the 27hp kubota gas engine which I could not find any parts nor a replacement engine for a reasonable price so that is why I did the engine swap. All that I need to do is swap out the throttle and choke cables and fab up a muffler system and i can get to cutting some grass in...

Well never mind. I discovered there was also a brake safety switch and it was the problem. that switch is hidden well and with all the grass that was around it i would have never seen it if it was not for the parts diagram. She fires right up now with the key. Now to fab up an exhaust and do...

I picked up a ZG227 which had thrown a rod for dirt cheap. It has about 1500 hours but is still in pretty dang good shape other than the deck needing a little work. Anyhow I could not find a replacement engine so I picked up a 26hp kohler (liquid cooled version) and I have been unable to...

Its crazy how little info can be found even when exhausting google to the very last page on these engines. :mad: If the engine would bolt up, i would figure out how to get every thing else working. The engines look nearly identical from the few pictures I can find for reference. I have noticed...

I have a B6100 that needs an engine. Would a D600 bolt up as a replacement engine? I understand it would be less power but if it bolts up it may be a way for me to get my tractor going again as I found a engine for sale locally.

I was hoping that Kubota used a different engine model number for OEM engine used by various other companies yet the engines were virtually the same. I can already tell some of the components are different between the two such as oil filter location but, Those may be things that can be dealt...

Would a D662 bolt up to a B6100? I found a good deal on a good running engine and rather than rebuilding my D650 Maybe I can just do an engine swap? I searched a good while without finding any info on such. Thanks Mike

I need a good D1105T turbo or at least a good waste gate actuator. I there are plenty of aftermarket actuators available but, I have not been able to find the specs on what the boost setting should be for the D1105T engine. If anyone has a good complete turbo or actuator let me know what you...

Steve, I did as you said and hooked the injectors up to the lines and they all seemed to have a nice spray pattern. It was a good mist in a cone pattern for sure. I checked to see if there was any bubbling in the radiator and there was no bubbles but you could see some disturbance which I assume...

Where might I find a engine repair manual or details on rebuild specs? Its about time to get this engine rebuilt now but, i need some guidance via a manual. :D

oops not sure how it got uploaded as private. Here you go. https://www.youtube.com/watch?v=zHYk2qGQWl8

I did not get the results i wanted by cracking the lines on the injectors but i did find that one injector was not tight at all in the head. I found that when I cracked the injector lines just a little the engine would die. One of the injector lines coming out of the fuel pump is leaking bad and...