Search results

I figured it out. It's a plug. I just had to pry it out.

I have a B7800 and recently had a hose bust on my front loader. I've replaced the hose, and now need to add fluid. I know where the fluid inlet is, but I'm not sure if the cap is a screw on, or if it snaps on. I don't want to force it since it's plastic. Can someone tell me how to remove it...

I have a B7800. I went to start it today, and it wouldn't crank over. I checked all levers, and found that the PTO lever was "on", and I couldn't get it to move. I've had this happen before when the tractor was running, and I just let out on the clutch, and pushed it back in, and the lever...

I have a Kubota B7800 with a LA402 loader. I was tilling my garden yesterday when I noticed that I had a leak coming from around the loader control valve. As much as I can tell, it looks like the leak is coming from where the fitting attaches to the hose. After consulting my manual, I believe...

My hobby is gardening, and I have three gardens that I plant. They are not huge, but enough that getting ready to plant is time consuming and labor intensive. I bought a used 3 pt Case/IH tiller a couple of weeks ago, and love it!! It is a 52" tiller that I use behind my B7800. The tractor...

I'm looking for a used 4' or 5' 3pt tiller. Would consider any brand, and may consider other sizes. Would pick up within 250 miles of Evansville, Indiana. Thanks Brad

We've had about 8" of snow the past week. I cleared off my drive, and my neighbor's drive. Maybe a 1st for a Kubota, we built a snowman with it. My son had rolled up snowballs for the snowman, and they were too large and heavy to pick up, so the Kubota pitched in and lifted the snowballs into...

Last night I finally got around to looking at the fuel filter. I had purchased a new one, thinking I would replace it. When I took off the bowl, and removed the filter, it was completely clogged with rust. I drained the tank, but didn't get any more rust. I cleaned out the bowl, filled the...

I think I'll take this opportunity to replace the fuel filter, air filter, and change the oil and filter, and create my own basline. Thanks for your input, guys. I'll let you know how I come out. Brad

I looked at the air filter, and it was a little dirty, but not to the extent that it should cause problems. I checked the air intake, and it was clear. I can't tell you for sure the last time the fuel filter was changed. I bought the tractor from a fella last year and he said that he had just...

Last night, I started my B87800, let it warm up for 30-45 seconds, backed out of it's parking spot, gave it a little more throttle, and then started forward. I got maybe 15' and it began to sputter, like a gasolene engine when the choke is on, and then died. Before it died, the exhause was a...

I have a 2005 B7800 for about 2 years now, and have been very happy with it. $10,000 is about the right price for around here. If there is a downside to the B7800, it would be with the 1/4" adjustment to the 3pt hitch. A little aggravating to use with ground engaging equipment like a plow, or...

I have a B7800 (30hp) and I have a single bottom, 12" plow. We have heavy clay. I have pleanty of power to pull the plow, but loose traction if trying to plow too deep. I have some ground that I plow that is less clay and I have no problems. I wouldn't want to try a 2 bottom plow in either...

I've got garden fever, so I've been getting the gardens ready. It was dry enough, so I plowed two of my gardens. I wanted to expand one garden, but a tree was in the way, so I dug down about 2' around the trunk of the tree, chopping roots as I went. Then the 'ol B7800 pushed the tree over...

My quarter inching doesn't appear to be working. I've seen the video on u-tube, and try to mimic what is being done in the video, but as soon as I "tap" the adjusting knob, the 3-pt does down suddenly, not just in small jerks like on the video. Is there an adjustment for this? I have a B7800...

Hi Jewing3227. I'm just right down the road from you just east of Evansville. I have a B7800 that I'm planning on filling the tires before spring. I bought a 12v pump from Harbor Freight, and a fill kit from TSC. I've found a place in Loogootee that will sell the beet juice for $3.50 gal...

In early 2010, I purchased a 2005 B7800 HST with FEL. It had 500 hrs, and was in perfect shape. I paid $10,500. I searched the internet for like tractors to see what they were selling for. Most were more than that, so I felt like I was getting a good deal. I've been very happy with it. Brad

I want a turning plow. I was thinking that I would get a 12" 1 bottom. I have the opportunity to get a 12" 2 bottom for $250. I don't have the rears loaded on my B7800, although I'm thinking of doing that. At 30hp, I have the hp, but do I have the weight and traction to pull a 2 bottom? My...

Thanks, Bulldog. I'll give it a try!! Brad

Bulldog, thanks for your reply!! I have a B7800, and there are two links with turnbuckles (one on each side) that go from halfway up on the lift arms on the inside, to just below and to the side of the PTO. Where they hook beneath the PTO, it pivots, which allows side-to-side movement. There...