Search results

Bolens 5020H. Have trouble with the hydro cylinder lifting the rear implements. The cylinder cycles completely, with no load, but hesitates under load or doesn't lift at all. Pressure shows in the required range. I re-ringed the piston and clean honed the cylinder. I did not change the hydro...

Picked up an old Bolens 5020H. Hydro unit with Model 11 Eaton trans. Charge pump leaks like bad enough it irks me. The pump mounts onto the front of the hydro and fits into your hand when off. Simple rotor drive. Has two square cut o-rings for mounting seals. Do you think I can substitute...

A lot of times, various vendors are posted on here. Needed new blades for the old 84" finish mower. Dealer wanted $55/blade x3 = $$$. Did about an hour of online shopping, and found a vendor I'd never seen. Called, got a live, well informed person. Gave me a 10% discount, and ended up...

Saw my first big kubota in the field, flashing duals, and turning some dirt. The guy was pulling at least a 25' disc towing a cultipacker, prepping lightly for bean planting. Had to stop and watch, but he was too far back to get a good pic with the cell. Looked like a newer series, and was...

Got permission fom some old timers to turn over some ground for them this spring. Gonna do about 85 acres, 12 ft at a time. Gonna split time between an ol 4020, and an IH 1066. Can't wait to get started. No cabs, no A/C, no radios. Just me, God, my buddy, our straw hats, bib overalls...

Got a chance to buy a 68' bbc 427 CE engine. Marked SHP, not a tall deck. Codes show this to be a period high performance replacement engine, corvettes, camaros, etc. Complete minus carb. Heads and all code out to 427. The gentleman selling took this as trade in the 80's on an old 50's truck...

Any çonsensus on the new "Hecho en Mexico" Rhino blades. Wonder if the quality is the same as the old grey, yellow ones.

Found this on local CL. Posting in case someone was looking. http://carbondale.craigslist.org/grd/4917899354.html

For those w/FEL, when parking, who places bucket flat on bottom vs. tilted forward with bucket front edge contacting ground. I see this trend varies place to place. What do you do?

As the season heats up, so goes the stories. http://m.nydailynews.com/giuliani-claims-obama-influenced-communism-article-1.2123541

So, I've got my old 86 gmc truck sitting in the barn, just itchin for warm weather to break. Needs some new rubber, just feel uneasy at 70 with 14 yr old tires. Anyway, thinking about 275/60/15 on a gm 15x8, factory stance. Worried about bulge look. Anybody ever ran this setup?

Got some leakage from the top of the pump. Fittings are tight, figure it's the orings, seals, etc. Other than a little hesitation at start, since we've been leaking, everything is fine. Should I shut off fuel, and let run dry, or dissemble wet?

Anyone else from MO, AR, il, hear about this? Saw it in the news about 2 hrs. away. http://www.semissourian.com/story/2143060.html t

Just picked up an old JD 246 planter. My b7100 will pick it up, but with the QH, and 5ft length of the planter, I'm worried about the strain on the 3pt equip long term. Anyone else run this planter on a similar unit. I'm all ears on opinions.

Got an old hand crank corn grinder I'm debating on powering. Have a 1/3hp, 1725/1140 rpm elec. motor sitting around. Think this would be enough juice and speed(pulley setup) to run this, or step up into 1hp.

Out turning over the garden for fall, on the way back to shop, heard a grinding noise from tractor. Coming from tunnel in front of trans, I think. Tractor was in 6H, 2wd at time. Hyd level ok, shifts perfect, just greased everything two weeks ago. Grinds worse in reverse. Any suggestions?

Local dealer just traded for a 86 B7100hst, 2wd. 1200hrs, rops, turfs, w/60" rfm. Paint a little faded, etc. Asking 2300? Considering this would be my second B, I was thinking of selling the mower, lowering my investment into the unit. Going there Saturday to take it for a spin. Is this out...

B7100d, right rear wheel hub is wore out. I plan on having this unit for some time, until it dies. Should I pony up the money for the eBay hub, or run an oversize pin in the hole to take up the slack. Other than cringing wheel wobble😬, everything else is ok.

Figured I'd ask the folks that use them the most for a fair market price on a piece I may sell next spring. What I got: 2003 M6800 399 hrs 4x4, R1 tires Cab, w/ac LA 1162 FEL w/bucket, forks...

Just found this in so. Illinois craigslist. If I didn't have one, I'd buy it. http://carbondale.craigslist.org/grd/4574509571.html