Search results

  1. je1279

    Reverse Alarm for LX2610 / B2650

    Old_Paint that's a good point as my Deere X585 had something similar on the PTO switch for mowing in reverse. That had separate pedal for forward and reverse though and I'm pretty sure it had reverse lights as well.
  2. je1279

    Snowblower Shear Bolts

    Thats interesting as a grade 8 standard bolt is hardened (and I was taught never to use them as shear bolts) while a grade 8 metric bolt is roughly the equivalent of a grade 2 standard bolt.
  3. je1279

    Snowblower Shear Bolts

    I dont have a snowblower but I recently watched a video on A Ritter Bit Will Do's YouTube channel and on his blower he said the impeller shear pin goes more frequently than the auger shear pins. He also has a good suggestion on using bulk grade 2 bolts as replacements but the size may be...
  4. je1279

    When should you check Hydraulic fluid level?

    GP I was thinking about the loss of coolant that you mentioned. Its possible that when they installed your block heater that there was an air pocket trapped lower in the cooling system somewhere and it finally "burped" resulting in the lower level. If it doesn't continue to decrease, I wouldn't...
  5. je1279

    New part for kubota b2710 fuel...

    I had to fix a disconnected hose on the fuel pump of my John Deer garden tractor last year and couldn't believe the amount of crud in the bottom of the tank. No idea how it got in there either...
  6. je1279

    Solved- L3901 HST had no power going to rear wheels

    Is it as easy as adding air to the tire/tires to reseat the bead?
  7. je1279

    This is nuts

    Does anyone know if Kubota or anyone else sells a touch up paint pen kit with both the orange and grey? It may be my OCD, but there are a few dings here and there on my LX2610 that drive me nuts.
  8. je1279

    When should you check Hydraulic fluid level?

    I can attest to GP's willingness to help others. If you check out some of his YouTube content, I think you will agree that it is not a shameless plug but rather, someone trying to troubleshoot an issue as we all do.
  9. je1279

    When should you check Hydraulic fluid level?

    Hey GP and welcome to OTT. I saw one of your recent videos where you mentioned that a number of your fluids were low at the same time which I agree is odd. I have a LX2610 as well and I've only needed to add hydraulic fluid after I installed the third function kit. As others have said, the...
  10. je1279

    B3300SU

    I can't help you with the clunck but how many hours do you have on it? Also, are the filters grey or white? They come grey from the factory and you can't purchase grey filters from Kubota. As you said, if they are not the factory filters and they have dates / hours written on them, there is no...
  11. je1279

    Lx2610 / B2650 Minimum Three Point Hitch Height

    So I figured out the issue today. There are supposed to be bushings/spacers on the inner portion of the lower three point shaft. Since my tractor was delivered with the mower deck kit attached to the three point hitch, it did not have these bushings and I removed the mower deck and kit for the...
  12. je1279

    Lx2610 / B2650 Minimum Three Point Hitch Height

    RCW thank you very much. I fully opened the 3 point hitch drop control knob and what I believe to be the position control on the three point lever is currently set to the lowest position. The lower arms are currently set to the furthest position out as you stated and I will try out the other...
  13. je1279

    Quick Hitch Question

    Thanks to everyone for their advice as I was able to remove the ballast box this evening by adjusting the top link and the adjustable lifting arm. Still is not exactly quick but I'm hoping that adding some additional height to the dolly will help moving forward.
  14. je1279

    Lx2610 / B2650 Minimum Three Point Hitch Height

    I noticed tonight that in the lowest position, the height to the center of the lower pins on my three point hitch (with quick hitch installed) is 16.75". That seems rather high to me but I was wondering if that is normal. Whats odd is that I have confirmed the quick hitch is level both front to...
  15. je1279

    LED bulbs

    You will love the LEDs. I did them all around on my LX2610 and don't regret a thing.
  16. je1279

    Dripping fluid on cold start - RESOLVED w/ info

    Another option I've used in the automotive world for hose clamps that love to loosen are t-bolt clamps. Just make sure that you have the room and do not overtighten them as they will crush whatever is underneath the hose.
  17. je1279

    Quick Hitch Question

    Haha thank you Mak65 and yes they are! My wife often identifies the problem I've been struggling with for hours when randomly walking by... Different perspectives I guess.
  18. je1279

    Quick Hitch Question

    Thanks i7win7 and will do.
  19. je1279

    Quick Hitch Question

    Thanks armylifer. Much appreciated!
  20. je1279

    I guess I will start here

    My LX2610 has a set of through holes both in the lower and upper ROPS sections. I assumed they were for mounting lights also so people don't drill through the ROPS.