Search results

Powerline from pole to house has a tree limb on it. Limb is maybe 14' long 3" diameter and has one end on another tree branch and other on power line. Figured I could shimmy across the power line like a military slide for life cable, but don't think it will hold me. Thought of a long medal...

Planning to rent a box blade Sat and seeking some advice. . Banked curve needs repair. What should be the high side (outside of curve) via drainage is the low side. After repair I plan to put in a guide to make it drain differently as suggested by things I've read on road maintainance (Belt...

Found a back blade at a price I can afford. And picked it up for 150 bucks. It's a 6' blade. Little big for my L225 and later L235DT once it is rebuilt. first question... Being a bit of a newbie... what should I look for that may be a sign that it was sold 100 bucks less than every other...

Ran across this supposed "York Rake Frame" on Ebay. I can't find anything like it elsewhere. does it have a different name used more commonly? It appears to by wording in the ebay ad that there is something missing from the frame. Im guess a blade making it a back blade with box blade like...

found below video. Thought it might spark an idea on how to load things in a unique non hydraulic or winch way. Could see this done safer by loading logs onto a trailer next to the wheel . Also could see putting a system to shock load the arm for the down portion would be beneficial. Using...

OK so its painted Kubota Orange and has some Kubota stickers....... but its still something someone here might like. http://rochester.craigslist.org/cto/4759436707.html PS- not mine, not associated in any way

It must be saved. Someone painted it ...... "JD Green" http://seattle.craigslist.org/kit/grd/4755225454.html again its not mine and I'm not associated at all

Mercedes based MBTrack and Unimogs https://www.youtube.com/watch?v=jIy8Lb4N9Gg#t=223

remembering a thread or two where one fabricated their own bush mower... Im wondering if one could just switch their Finish mower to Bush Hog by: 1. make sure there is a clutch, belt that would slip, or shear pin. If not fabricate one into system. 2. remove finish blade 3. replace with same...

On my L225 if I sit a while with engine running; hopping off to remove something in the way for example, it wont go back in gear... almost like the clutch is not engaged (but is). Same for PTO lever. If I turn off the tractor and put in gear or PTO, restart and drive on then it will switch...

obviously that is a width measurement of the implement then a 32" monitor is not really 32 width but diagonal. Sooooo with that. Am I correct that for blades, plows etc.. 60"/5ft is just that from edge to edge of the blade where a mower is NOT cutting width but housing width so 72" is NOT 6ft...

Did a search first using this sites engine and google and didn't run across anything but... maybe used wrong key words. Has anyone converted a Belly Mower to a 3point? My mower is an older all pulley and belt mower. Seems one could add some structural bits to the housing and convert it to...

found this hope it helps someone http://lawnandgarden.manualsonline.com/manuals/mfg/woods_1/woods_1_product_list.html

Ok had to guess how to remove belly mower from L225 cause tractor w/mower was too wide for trailer. ended up jacking up the front end of tractor after removing all pins and chains from Mower/Tractor and snaking mower out the side and under front tires. Put it all on the trailer and got Tractor...

When I get a box blade (maybe tomorrow) am considering modifying it with some detachable wheels and a detachable blade that protrudes lower than rear of box.. Basically it would be just the carrier for a detachable blade. If one can tilt the unit some putting the front upwards so it has space...

wrong forum? Moving to fabrication Can't find delete post/thread

Bought an L225 and belly mower that runs real nice. thought was to put its D1101 into the L235DT I have along with belly mower and sell off parts ending up a tad better dollar wise. Now I see though: . the Hydraulic pump is different, Can a swap the D1102 unit onto the IP on the 1101? . Water...

not mine. Wish I had -little- (make that "lot") more money and a truck heading this way from TX:( https://mcallen.craigslist.org/grd/4676214602.html

There is a 1402 at what "might" be reasonable price but would it even fit in place of a locked up 1102 in an L235?

My engine siezed. :(:(:(:( New it was a potential thing though. Anyway... looking for replacement. Im located in southern OH