Search results

That looks like it should be spectacular, pics when you light it off.

That's some nasty looking stuff.

Right now there is no border control, and trespassing isn't new around here. There used to be a "highway" about a mile down the road. They would follow the highline that heads east. Don't know if they knew purple, or just din't care and breaking into homes especially trailers was common, so much...

How does the dam preventer work? Too bad the purple paint doesn't keep them out, they don't care. Here in Texas illegals are a problem everywhere. Only thing it really does is give the tresspassing charge more effective.

Where did you get the volt meters?

Great job on the video. Looks like you're having way too much fun. Don't know how far you are from me, but I'd love to jump in and help. I love doing things like you're doing and I'd just love to jump into that skidsteer and push up some burn piles.

I'm thinking it has something to do with the float feature that I can't get to work. Check the pm I sent you, I'd like to give you a call.

I don't have the power beyond adaptor in yet (don't have one) and yes, it would go in the N port. Send you a PM

First, don't think I mess up the pump running it the way it is till I get the rest sorted out since I have a line running to the trans. case. Verified flow oil going back to trans case. I need the loader to fill deer feeders. Pic shows line going into case. 2 pics showing valve installed...

Trying to keep this simple. The two lines coming from the block are hoses. I first hooked up the bottom one to the new control valve. FEL didn't respond so hooked up the other one that's on top and it worked. My assumption is I need to install a power beyond, hook up the bottom hose (now capped...

OK, that problem is solved. Took a closer look at the 2gauge cables. Cut the shrink wrap off and sure enough there was the green stuff. Replaced both with 2/0 cable and that fixed that problem. Now the next one. Installed the new Summit control valve. Got it to work, but the float function isn't...

They are 2 gauge with clean ends and clean spots where the ground and + cables go. The jumper test as you described was on the schedule this morning right after I see if I can relieve the pressure on the hydraulic system.

I'll give that a try, thanks. If that's what it is, then that's a whole other can of worms I just opened.

Mid 70's, no way to narrow it down. Unknown hours, tach wasn't working when I bought it about 8 years ago. No mention of battery in manual. Temp in the low 60's. I'm guessing starter is original. Battery was outside when it blew, no collateral damage. I'll put it on a 2amp trickle overnight or...

Several weeks ago had a neighbor use the Kubota with loader to fill deer feeders. Well, as luck would have it he left the key on for for about 2 weeks. Ran the 4 year old Interstate down to where it wouldn't even take a charge. I used my battery charger with 200amp jump start. Fired right up. He...

Don't think that's for me, I'll stick with my light weight Husquvarna pole saw. Don't need a safety harness and I use it under trees and for tree trimming.

Often wondered about using a blade on a weed eater. Seems like there would be a lot of kickback.

This is really uncalled for. Glad there is no freezing rain or snow. This ain't right for Utopia. Heck it's 19.9 here in Pasadena, dang sure that ain't right.

18.5deg. in Utopia TX this am. This is just so wrong.

Mid 70's L175 still got a lot of life left in it.