Recent content by Cobraone

  1. Cobraone

    Loader hydraulic coupler leaking on a BX2380

    QD couplers are a known problem and weak link, unfortunately we have to live with them, they are the first place kubota mechanics look at for FEL problems, I had one fail internally, bad check valve, caused my FEL to move very slow
  2. Cobraone

    Block heaters

    I use the kubota screw in block heater for my B2650, working fine for about four years, I think Kubota charges around $50 dollars for it
  3. Cobraone

    G1800 Driveshaft Replacement Tips

    I need to replace my water pump and thought about replacing the driveshaft at the same time, glad to know about the 12mm bolts and as we all know a good picture is worth a thousand words, my G1800 has over two thousand hours, starting to worry about that driveshaft, but overall it has been an...
  4. Cobraone

    Let it snow!

    Looking good wolfman!
  5. Cobraone

    New whip

    Excellent tractor, I love mine! Congratulations
  6. Cobraone

    Molybdenum based EP grease

    Swepco moly 101 ep moly grease, best I***8217;ve ever used, we pack sand rail cv axles with excellent results, Amazon sells it but not Cheap https://www.swepcolube.com/sites/default/files/package_inserts/swepco_101_moly_grease_sales_brochure_j11843.pdf Disclaimer, I have no personal...
  7. Cobraone

    Cables for loader joystick frozen..help

    Try to flush with alcohol, they make a cable tool for motorcycles that should work, we flushed aircraft cables to prevent freezing. After flushing with alcohol we used tri flow to lubricate the cable, tri flow has suspended Teflon, also know as mouse milk.
  8. Cobraone

    B7000 cold start rod

    I’m guessing that he’s talking about the compression release
  9. Cobraone

    Kubota G1800 temperature gauge inop

    I found the yellow sensor wire broken at the ring terminal behind the temperature gauge, I had to remove the steering wheel and two molex connections to gain access to the back of the temperature gauge This had been driving me nuts as I knew the overtemp sensor was working and confirmed by...
  10. Cobraone

    Tractor Weights

    It’s been my experience, that the information provided here is usually more accurate and thought out than my dealer provides, just saying
  11. Cobraone

    Experience with King Kutter?

    Worst factory welds I’ve seen, is this made in the USA? Amazing it lasted you two years Looks like you’re set up for a quick repair, imagine if you were a customer with no welding abilities.
  12. Cobraone

    Oops I did it again...

    Forward weld is undercut and aft welds are a little cold also you missed a crack under the nut, fully agree with previous post 6010,6011, 7018 stick Understand your limitations, but this repair will fail again in short order. my 02 cents
  13. Cobraone

    Model Specific Forums

    I would second that! I do use the search function to find specific post pertaining to my model
  14. Cobraone

    Favorite Deer Rifle

    I use a tikka T3X lite in 7mm-08 here in northern Michigan
  15. Cobraone

    Bolt On Hooks on 2356 Bucket

    Re: Bolt On Hooks on B2366 Bucket Sodark, I took advantage of the reinforcement lip and drilled through both pieces, I***8217;m trying to send pictures