Recent content by Bulldog

  1. Bulldog

    Synthetic or Conventional motor oil in Kubota diesels

    Just something to think about because I believe you left out a couple of things that need to be factored in to your equation. 1. Can't just look at cost alone. Need to compare a standard 5k ($19) oil change to a 25k ($50) oil change. 5 Cheap changes is right at a $100. 1 synthetic change is $50...
  2. Bulldog

    Fram Oil Filter for BX2680?

    I wondered that myself. It's not like it needs changing once a month.
  3. Bulldog

    L3300 Loader

    Look for a local hydraulic shop. I had all 4 of mine built on mu LA450S this spring for $200.
  4. Bulldog

    Diesel Transfer Tanks/Pump

    Started out with a 55 gallon drum and fill-rite hand pump. Went to a 55 gallon L step tank with fill-rite electric pump. Then added a 105 L step with GPI electric pump in another truck. Plus a 275 and 600 gallon bulk tanks both with fill-rite electric pumps. All with Goldenrod filters. Don't...
  5. Bulldog

    Fram Oil Filter for BX2680?

    I'd rather run a used Kubota filter instead of a new fram. That's probably the worst filter on the market.
  6. Bulldog

    Sunshade

    I put a Kubota canopy on my first M9000. It was nice and came with insulation already on it. I built the one on my L 3000 and made it how I wanted. Plus saved about $300 compared to oem.
  7. Bulldog

    M8200 pto issue

    How many hrs on the tractor? What kind of fluid did you use?
  8. Bulldog

    Hydrolic filter and fluid change.

    Without knowing what has been done to it and how often I'd suggest doing a full service including hyd fluid and anti-freeze. Then you have a base point to start your own schedule from. And don't cheap out. Use sudt2 and Kubota filters.
  9. Bulldog

    Tractor Time with Tim - LX3310 and RHINOAG TS10 Flex-Wing problems

    The 1000 lb was the tongue weight. That cutter is close to 3000 lbs.
  10. Bulldog

    Tractor Time with Tim - LX3310 and RHINOAG TS10 Flex-Wing problems

    I don't care what Rhino says. At some point common sense has to kick in and realize no 25 hp tractor should have a 10' cutter behind it. To me it's just asking to get somebody killed. With more new owners trying things like this before long a heart broken family member is going to have to share...
  11. Bulldog

    Tractor Time with Tim - LX3310 and RHINOAG TS10 Flex-Wing problems

    Looks like a perfect example of trying to use a implement that was never designed for that size tractor. I've seen several posts on FB with that cutter being put behind 30ish hp tractors. No way I would ever do that. Simply not enough tractor. Reminds me of my buddy pulling his race car...
  12. Bulldog

    Rear tires for the M9000

    Friend of mine ordered a set of BKT radials for one of his tractors on-line. Even with shipping they were only like $1500 for both rears. Might look at doing something like that.
  13. Bulldog

    Reart wheel weights for M9000?

    You may be right. I'll have to look at mine to see. I ordered mine with cast centers when I bought it.
  14. Bulldog

    Reart wheel weights for M9000?

    Use anti-freeze and water instead of calcium. Might try the dealer for the cast centers. They weren't that high when I ordered the tractor but getting them after the fact may be a different story.
  15. Bulldog

    1 or 2

    My experience when 2 cylinders are doing the same job when you only repair one the other will go shortly after. I'd do both and be done with it.