Search results

i've have cab cooling issues from day of delivery. the local dealership has never found the reason. (part of the problem is that i didn't verify that the a/c issue was on the customer receipt, during the warranty period)... now the a/c is actually getting fixed at my cost. the repair shop...

the b2650's with a cab have a issue of low air flow for the condenser and radiator, due to the oem battery blocking most of the air flow.. the battery is mounted such to make it a challenge cleaning off the condenser and radiator. during mid and late summer, the a/c was barely keeping the cab...

i had one of the defective b3350's, the good point... the cabs a/c worked great. my b2650's a/c has been a disappointment since purchase. it's been checked, dealer says it's working fine. tell that to the operator, when its 70-75 out and the cab is in the 80's with the a/c on high. engine...

i left kt3 with my local dealer the first week of august. for the 200 hr service and to have the a/c checked. as the a/c couldn't keep the cab cool after noon. i found out that the inlet air filter was plugged, guess i better remember to recirc the air in the cab to keep the filter clean longer...

B2650-3350 hsdc a/c & heater... just checking with owners of these models of tractor. if your in a cold climate, are you keeping warm??? i'm currently in central texas, the a/c cools you eventually, it takes a long time for the unit to catch up with cab heat and the sun.. it would perform...

i've noticed the offset of the front rims. i'm considering swapping them side to side to give the B a wider stance. maybe do the same in the rear, for more stability. what are the pro's and cons, of doing this.??? all comments / suggestions welcome....

slight problem attaching my bh-77 to the new B2650hsdc not enough space between back hoe sub frame and the mmm lift pivot. so i removed the right side tire, mmm pivot rods and the pivot arm. i cut some of the pivot tubing off from the inside. finishing that project. i could now bring the...

i received these friday evening. delivery is scheduled for monday morning.

many of you have followed my postings about my B3350 hsdc. i bought in january 2016. 12 visits or trips for service/repair. 11 of them due to particulate filter regen issues. kubota put a stop work order on my tractor in early july. i received a call from the manager of my new dealership, a...

the manifold at the base of the operators station. is leaking fluid, getting to the point i need to service it. i haven't been able to find a service manual. any suggestions. i suspect it's just needing some o-rings and cleaned. but want to make sure i don't mess anything up taking it apart...

after a long wait, many calls. also waiting on parts. my new tractor has returned home. with a new wiring harness, new computer, new software, new alternator and a few sensors.. i've put over 20 hours on it this week. not a single problem. i will post again after it passes the 100th hr of...

i realize that i'm down sizing from a L3200 to B3350. but Kubota should install hydraulic cylinders on their front end loader that will let you fill the bucket with one try. the cylinders they installed are just a bit undersized and as the tractor ages, they will become noticeably too weak, to...

i'm starting the documentation of my place. a property devastated by a wildfire. i hope you enjoy the progress as it occurs. i warn you it has been and will continue to be a progress at a turtles pace. enjoy: the project started with the purchase of a L3200 HST

so how many of you change the engine drain plug gasket every time... (i just found out that it's a recommended step, not mentioned in the owners manual).

i never found it in my owners manual. but recently i was informed that the drain plug gasket on my l3200 must be changed with each oil change.. finding a dripping drain plug gasket is not something you want to find...

thinking of downsizing.. L3200hst to a B3350hst with a cab and mm mower... trying to see what equipment i have that can be used with the smaller tractor. 5' rear brush hog, row furrower on a bar. 50" tiller. post hole auger. quick connect bucket and forks. (i figure the frame would be different...

has anyone installed a extra pulley on their l3200. i'm considering a cab and adding a/c so i'll be more comfortable during summer work... i've looked things over, after finding room for a compressor. i need a dual pulley for the engine. swapping pulley's from a different tractor would be the...

over the past few months, of brushing and logging i have sheered a pin for my left brake.. i've been told by the dealer. that i need to split the rear case to have access to the brake linkage and the sheer pin... has anyone gone into a l3200 rear end... if you have, have you any suggestions...

clearing damaged trees i bought the place after a wildfire... almost all of the trees have fire damage and must be removed. hope you enjoy, some of what my "kay-tee" has done (Kubota Tractor = K T = "kay-tee")

on the fender to the right side of the seat. there's a lever to engage/disengage the pto. with very little use, this little cable has formed a weak area that bends when you try to disengage the pto. to make the pto shaft stop, you must straighten the cable to push toward the gear housing. or...