I have 6 of these weights I am not going to use. Thinking about FB market place to find someone local. Any idea of value?
Wheel weights
- Thread starter D2Cat
- Start date
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Weights for front end go for AT least a buck a pound, today more like 2 bucks a pound.
WHEEL weights are a little more of a hit and miss with bolt patterns. Do a little research and find out what new cost...... then start at 60% of new - and if they bargain, take no less than 50% of new! My 2.36 cents.
WHEEL weights are a little more of a hit and miss with bolt patterns. Do a little research and find out what new cost...... then start at 60% of new - and if they bargain, take no less than 50% of new! My 2.36 cents.
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
I wonder how/what these things are shipped from the factory? I'm sure they do, but who and how? I have had Old dominion Freight pick up a 5' mower deck I had on a pallet. I suppose these weights could be steel banded together.....no crate needed!!
I bought some for my M a few years ago through tractorweights.com Don’t remember the freight line but they were just banded onto a pallet.
This is how the weights for my MX showed up. I can't remember if I got to keep the ratchet straps or not.
y'all both near a Fastenal location?
very competitive ltl and private party friendly
good luck!
very competitive ltl and private party friendly
good luck!
I am. I also have a loading dock at my employery'all both near a Fastenal location?
very competitive ltl and private party friendly
good luck!
IMO they would not be reduced in value by mileage or hours. Can of paint and they are as good as new. I certainly would not sell them for less than price of weights. If you have the hardware, then they are same as new unless the hardware has been used (threads compressed from a torque standpoint…probably still fine(no pun intended) 
and nothing some thread lock would help.
inside think you should be able to get newish value from them.
and nothing some thread lock would help.inside think you should be able to get newish value from them.
Three sets of wheel weights for the MX (LM8124) with the bolt kits are $906 from the dealer but shipping could be free if ordered as part of a dealers regular shipment. If I were selling the weights I'd ask 80% of the new price.