Wheel Specs B2150hst for Wheel Spacers

[NorCalOrange]

Considering buying custom made rear wheel spacers for the B2150hst 4wd and need the wheel specs. Their is a shop that makes custom spacers for a lot less then the companies typically mentioned using the same materials.

I know the bolt spacing is 6 inches, 6 x 152.4mm. Where can I find the center bore size and stud thread pitch.

Also, do 2 inch wheel spacers make a significant, obvious, improvement in stability on steep terrain and hills? Or go with 3 inch spacers? My concern is increased bearing wear and axle stress with a wider spacer.

 

[BAP]

Your best bet if you are having custom spacers made would be to take measurements off your tractor and wheels so that they come out correctly.

 

[Muzzy]

2" Wheel Spacers will make a big difference in stability.

 

[NorCalOrange]

Yes, Im thinking 2 inch would be good as this B2150 has the wider offset wheels and 12.4 x 16 tires making a 63" width.

These are B8200 specs that uses the same axle/hub assy as the B2150. Will verify on the tractor.