V1505T Engine - Do I really need part 2500879 pin, pipe?

R.Smith

Member

Equipment
Bandmill with V1505T engine
Jun 27, 2020
32
0
6
Iowa
Howdy. As the title says, do I really need this part And if I do could someone please tell me where to look for it. I'm not having any luck locating this part.

R. Smith
 

Pau7220

Well-known member

Equipment
L3650 GST, Landpride TL250 FEL w/ Piranha, 6' King Kutter, GM1084R Finish
Aug 1, 2017
785
276
63
Scranton, PA
You really need to be much more thorough with your explanation as to what you have going on and what you need.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,306
4,858
113
Sandpoint, ID
Howdy. As the title says, do I really need this part And if I do could someone please tell me where to look for it. I'm not having any luck locating this part.

R. Smith
Kubota Part Numbers are XXXXX_XXXXX so I don't know what part you're looking for.
Is it the pipe from the block to the head?
If so yes you 100% need it.
 

R.Smith

Member

Equipment
Bandmill with V1505T engine
Jun 27, 2020
32
0
6
Iowa
I have to plead ignorance. I guess i assumed the part number in the manual I saw online was accurate. Yes, it's the pin, pipe that goes from the block to the head. I have no idea what it's purpose is. It's number fourteen in the drawing I hope I've included.
 

Attachments

200mph

Well-known member

Equipment
L4740-3 Cab, FEL, Fnt Snow Blower L2185, LP Finish Mower, LP Rotary Mower
Mar 3, 2017
1,228
58
48
PA
Mr. Wolfman has answered your question since it is indeed between the block and head. It's needed.

Here's an example of PN: Example of Pin, Pipe PN
 

SidecarFlip

Banned

Equipment
M9000HDCC3, M9000HD, Kubota GS850 Sidekick
Oct 28, 2018
7,197
546
83
USA
Looks like a locating dowel pin to me.
 
  • Dislike
Reactions: 1 user

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,306
4,858
113
Sandpoint, ID
That pin pipe moves oil from the block to the head for lubing the valve train.
Putting a dowel pin in place of it will destroy the top end.
Not putting a pin pipe in it will likely cause it to leak oil.
You need P/N 16241-33650 ;)
 
  • Like
  • Dislike
Reactions: 2 users

SidecarFlip

Banned

Equipment
M9000HDCC3, M9000HD, Kubota GS850 Sidekick
Oct 28, 2018
7,197
546
83
USA
Hard to ascertain Wolfman. Looks like a dowel pin in the drawing and well all know Kubota loves dowel pins....

Tit for tat then................. :p
 

R.Smith

Member

Equipment
Bandmill with V1505T engine
Jun 27, 2020
32
0
6
Iowa
Thank you everyone. 200mph has what I'm looking for I think but are all of these "pins , pipe" the same or do I need one just for my engine?

It would be nice to know the correct part numbers but I can't seem to find them. Does anyone know a site that shows them? That would sure help since a need a couple oil seals that don't have any numbers on them.
 

Dave_eng

Well-known member
Lifetime Member

Equipment
M7040, Nuffield 465
Oct 6, 2012
5,108
926
113
Williamstown Ontario Canada
For anyone who doubts NIW and 200mph's opinion on dowel vs pipe in this one engne location.

forum pin pipe.jpg


There are dowels and then there is a single pin pipe to provide an oil passage

Dave
 
  • Like
Reactions: 1 user

R.Smith

Member

Equipment
Bandmill with V1505T engine
Jun 27, 2020
32
0
6
Iowa
That pin pipe moves oil from the block to the head for lubing the valve train.
Putting a dowel pin in place of it will destroy the top end.
Not putting a pin pipe in it will likely cause it to leak oil.
You need P/N 16241-33650 ;)
Thank you. I wasn't smart enough to also ask the purpose of the part. Now i know.
 

200mph

Well-known member

Equipment
L4740-3 Cab, FEL, Fnt Snow Blower L2185, LP Finish Mower, LP Rotary Mower
Mar 3, 2017
1,228
58
48
PA
Curious to learn how the rebuild is working.
 

R.Smith

Member

Equipment
Bandmill with V1505T engine
Jun 27, 2020
32
0
6
Iowa
Curious to learn how the rebuild is working.
Slow but sure. Right now while I'm waiting for the two oil seals and that pin, pipe to arrive I'm working on the old vertical band saw mill the engine belongs on...
 

kkk

Banned

Equipment
rtv900 /u15 ex/WP 955/woodmizer LT15
Apr 10, 2020
47
7
8
OreGun, BLM
Ok.......P.ics of the Saw Mill.....Theres a few of us that are into that.
Its not like you don't have time...while your waiting...jk