The lift cylinders for my SVL 90 have stopped working. The pitch for the bucket works. I have traced the flow to a distribution block, but have no idea where the problem could be. Dealer said it may be a solenoid, but that is a $750 maybe answer Has anybody got any suggestions?
SVL90 hydraulic issues
- Thread starter Brett4usm
- Start date
usual stuff...fluid level, filter, solenoid plug wiring / terminals not corroded, fuses, tap on solenoid lightly? sorry that's about all i got
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
I would suggest you get the WSM.
You first need to know is it a SVL90 or SVL90-2 as they are different.
SVL 90 P/N RY911-20820
http://www.colemanequip.com/parts/KubotaParts/RY911-20820/
SVL90-2 P/N RY911-21350
http://www.colemanequip.com/parts/KubotaParts/RY911-21350/
The WSM should give you all the troubleshooting advice and part repair/ replacement information that you need to get it fixed.
You first need to know is it a SVL90 or SVL90-2 as they are different.
SVL 90 P/N RY911-20820
http://www.colemanequip.com/parts/KubotaParts/RY911-20820/
SVL90-2 P/N RY911-21350
http://www.colemanequip.com/parts/KubotaParts/RY911-21350/
The WSM should give you all the troubleshooting advice and part repair/ replacement information that you need to get it fixed.
I appreciate the information. Unfortunately, while taking the solenoid off, one of the wires came out of the pack resulting in my having to buy a $750 replacement. It should be in today so I will update if that fixes it. If not, I will most likely break down and take to the dealer. ***128078;***127995; I am still open to other suggestions.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
I would say you got off lucky if that fixes it, as some of the valve sets for that model run in the range of $2000+, and you have to buy the whole setup, not individual parts! 
Solenoid did not fix it. I have checked wires, oil levels, filters, fuses, etc. unfortunately I am going to have to reassemble and take it to the dealer. Naturally I get the problem that "they have never heard of." I Will update the post when we get a diagnosis.
I had a Cat loader do the same thing. It was a solenoid.
I don't know about Kubota, but our Cat dealer wouldn't put parts on just to throw parts at it. If they put a part on and it was wrong it was on them, time included.
I don't know about Kubota, but our Cat dealer wouldn't put parts on just to throw parts at it. If they put a part on and it was wrong it was on them, time included.