Slv65 error code e026 wont start
- Thread starter kaffinated
- Start date
Do you have a specific question you'd like the forum members to comment on?
This was from a SVL95 manual, so act accordingly.
E: 026 CRS CAN communication - --- Immediately contact your local
dealer
This was from a SVL95 manual, so act accordingly.
E: 026 CRS CAN communication - --- Immediately contact your local
dealer
Last edited:
It’s a CAN communication issue. It’s may be a bad module, or if you were banging around a plug may have come undone. Code says to contact dealer. Let us know what they find so others can benefit from it.
ehenry
Active member
Equipment
BX22, FEL, BH, 40" pto tiller, 42" Bushog Squealer, pto hole digger, B7300 w/60"
ehenry
Active member
Equipment
BX22, FEL, BH, 40" pto tiller, 42" Bushog Squealer, pto hole digger, B7300 w/60"
AsA Ed from the dealership have checked all connections and ohm wires like instructed by Kubota tech. All appear good ! got back in touch with Kubota tech. waiting for a answer from them on what to do next. Bye the way the other SS75 did have a skip but all codes have gone away and I ran the machine with no problems unloading trucks? The skip is not apparent anymore.
Asa, What Axelrod is saying is what I had told you on day one. Kubota tech feels there is a bad pin in the CAN connector or pinched wire somewhere on the machine I will check that out tomorrow. Electrical problems can be real easy to find or very very hard to pinpoint. But we will find it!