No POTree I didn't get a chance this weekend. I'm going to adjust the clutch tomorrow. As for the fluid i did not change It. I took a sample with me to the local kubota shop where the old school kubota mechanic (who's smoking a corn comb pipe) told me the oil looked fine. I asked him if I should just change the filter just to see and he said it would be a waste of money. Again I don't know for a fact which oil the last guy used just going off him saying he used the kubota utd. My gut is telling me just to change it just to know it's done. I was reading about similar issues in others L35 and seems there's 3 breathers under the tractor? I do know the one comes from the front axle has a rubber boot around it and leaks but I don't believe it's part of my issues. I will attach what document I found online and maybe you could help me. I did notice that the forward/reverse shifter know has been rewelded onto it's handle right at the steering wheel if that says anything??1 Did you get the foot clutch adjusted? You can check it for slipping by engaging the PTO and see if it keeps turning when the tractor stops.
2 Did you change the hydraulic oil and filter? The filter could be clogged, giving low pressure, keeping the clutch from fully engaging.
Attachments
-
436.9 KB Views: 125