Seat interlock bypass

TBayOrange

New member
Lifetime Member

Equipment
B2650HSDC, LA534 FEL, BH77, B2782 63" blower, BB1560, RB1672, QH16
Dec 1, 2019
29
6
3
Thunder Bay, ON
Having some trouble with my seat interlock, works fine for me but no matter how I adjust the air ride seat my wife is not able to move the tractor.
I will be having surgery shortly and my wife will need to operate the tractor to clear the snow and our dealer wont be able to get me in before then. I wondering if anybody has experience with disabling the seat interlock? Thanks in advance.
Cheers Colin
 

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,962
7,050
113
Wind Gap, PA
Here's what I did. Perhaps yours is the same as mine...

"stock"

B2650 switch normal position.JPG

"Fixed"

B2650 switch fix.JPG
 
  • Love
Reactions: 1 users

Henro

Well-known member

Equipment
B2910, BX2200, KX41-2V mini Ex.
May 24, 2019
6,124
3,421
113
North of Pittsburgh PA
Having some trouble with my seat interlock, works fine for me but no matter how I adjust the air ride seat my wife is not able to move the tractor.
I will be having surgery shortly and my wife will need to operate the tractor to clear the snow and our dealer wont be able to get me in before then. I wondering if anybody has experience with disabling the seat interlock? Thanks in advance.
Cheers Colin
I would follow dirtydeed's idea.

I doubt your dealer would eliminate the interlock, and it could be your wife is just not heavy enough to activate the interlock.

Have a similar issue in our Subaru, where the air bag does not always activate for the passenger...wife is too light...

Remember, these seat interlocks we never used on older tractors. Neither of mine have them...do not miss them...but on the other side of the coin, make sure the wife is aware of dangers operating tractors...

Hope you find a solution that works for you!
 

TheOldHokie

Well-known member
Lifetime Member

Equipment
L3901/LA525, G2160/RCK60, G2460/RCK60
Apr 6, 2021
13,238
7,467
113
Myersville, MD
windyridgefarm.us
Having some trouble with my seat interlock, works fine for me but no matter how I adjust the air ride seat my wife is not able to move the tractor.
I will be having surgery shortly and my wife will need to operate the tractor to clear the snow and our dealer wont be able to get me in before then. I wondering if anybody has experience with disabling the seat interlock? Thanks in advance.
Cheers Colin
I'm jealous - my wife has no problem with that interlock....

Dan
 
  • Haha
  • Like
  • Love
Reactions: 4 users

TBayOrange

New member
Lifetime Member

Equipment
B2650HSDC, LA534 FEL, BH77, B2782 63" blower, BB1560, RB1672, QH16
Dec 1, 2019
29
6
3
Thunder Bay, ON
I would follow dirtydeed's idea.

I doubt your dealer would eliminate the interlock, and it could be your wife is just not heavy enough to activate the interlock.

Have a similar issue in our Subaru, where the air bag does not always activate for the passenger...wife is too light...

Remember, these seat interlocks we never used on older tractors. Neither of mine have them...do not miss them...but on the other side of the coin, make sure the wife is aware of dangers operating tractors...

Hope you find a solution that works for you!
She operates it regularly but I did reinforce the dangers to her. Thanks
 

TBayOrange

New member
Lifetime Member

Equipment
B2650HSDC, LA534 FEL, BH77, B2782 63" blower, BB1560, RB1672, QH16
Dec 1, 2019
29
6
3
Thunder Bay, ON
I'm not the sharpest tool in the box, but if she operates it regularly, what is the root issue?

I guess I missed something...
The seat interlock issue started a couple of months ago, even happens to me when the cabin is cold, then hunting season😊. I wasn't worried about it until my surgery date was moved up to next week.
I thought I'd get it fixed at the 400 hour service in a couple of months. Now I can't get it in for a few weeks and we are sure to have snow before then.
 

Chanceywd

Well-known member
Lifetime Member

Equipment
Kubota L2501DT BH77 VIRNIG URG60-CT 1950 8N WC-68
Mar 26, 2021
885
877
93
central ny
My L2501 has a similar switch to the one pictured and was a little sensitive for me when I tried to lean forward to see the forks. I put a short piece of 1/4" id air hose on it and that was enough to push it down a bit more so I haven't had it happen all summer.

bill
 

DustyRusty

Well-known member

Equipment
WAS BANNED FOR NSFW PICS
Nov 8, 2015
6,517
5,164
113
North East CT
My wife will not even drive my 1962 Chevy, which is very much like the car she learned to drive with, or at least supposedly learned to drive.
 

TBayOrange

New member
Lifetime Member

Equipment
B2650HSDC, LA534 FEL, BH77, B2782 63" blower, BB1560, RB1672, QH16
Dec 1, 2019
29
6
3
Thunder Bay, ON
So today I bypassed the seat interlock, nothing like the pictures supplied by @dirtydeed, his might be an open cab model not sure, mine has a cab.
Thinking that my situation was the same as dirtydeed's I started out removing the seat. Removing the seat is not necessary. You start by removing the seat cushion, loosen the Velcro on the front and pull down on the seat back, the cusion will now be free of the seat. 20211125_170628.jpg 20211125_170643.jpg


20211125_143418.jpg

Next you will move the seat all the way forward and disconnect the connector for the seat interlock. After that I made a small jumper with 14 AWG wire and inserted it into the connector. 20211125_165038.jpg

When that is complete reattach the seat cushion and you are ready to go. I will be getting some shrink wrap to cover the jumper with but other than that its a pretty quick fix once I knew what was happening.
Cheers
 
  • Like
Reactions: 1 user

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,962
7,050
113
Wind Gap, PA
Great. Ya sorry, didn't know you had a cabbed model. Mine is rops.
 

DeepWoods

Well-known member

Equipment
B2650HSDC Woodland Mills WC68 Wood Chipper
Apr 10, 2019
342
284
63
Bigfork Minnesota
Or you can do what I did as posted here


it has been this way for a year now without one failure and I still have all the functionality of the original seat switch
 

Mudman21

New member

Equipment
B2650
Jul 10, 2026
1
0
1
MI
So today I bypassed the seat interlock, nothing like the pictures supplied by @dirtydeed, his might be an open cab model not sure, mine has a cab.
Thinking that my situation was the same as dirtydeed's I started out removing the seat. Removing the seat is not necessary. You start by removing the seat cushion, loosen the Velcro on the front and pull down on the seat back, the cusion will now be free of the seat. View attachment 70423 View attachment 70425


View attachment 70426

Next you will move the seat all the way forward and disconnect the connector for the seat interlock. After that I made a small jumper with 14 AWG wire and inserted it into the connector. View attachment 70427

When that is complete reattach the seat cushion and you are ready to go. I will be getting some shrink wrap to cover the jumper with but other than that its a pretty quick fix once I knew what was happening.
Cheers
On my B2650, it appears if I pull the seat all the way forward, the connector is directly behind the seat and is very easy to access from behind through the rear glass panel that swings up or from over the top of the seat. Unless I'm looking at a wrong connector, I don't think the seat cushion has to be removed to access the connector. Am I looking at this correctly?
 
Last edited:

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
36,778
11,486
113
Sandpoint, ID
On my B2650, it appears if I pull the seat all the way forward, the connector is directly behind the seat and is very easy to access from behind through the rear glass panel that swings up or from over the top of the seat. Unless I'm looking at a wrong connector, I don't think the seat cushion has to be removed to access the connector. Am I looking at this correctly?
I really hope he got it figured out 5 years ago. 😜
 

Russell King

Well-known member
Lifetime Member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
8,101
3,189
113
Austin, Texas
On my B2650, it appears if I pull the seat all the way forward, the connector is directly behind the seat and is very easy to access from behind through the rear glass panel that swings up or from over the top of the seat. Unless I'm looking at a wrong connector, I don't think the seat cushion has to be removed to access the connector. Am I looking at this correctly?
The original post is about a tractor with an air suspension seat. I doubt your tractor has an air suspension seat.

An air suspension seat has to have the seat switch in the seat cushion since the whole seat moves up and down. The type you have probably has some springs but will move down and stay down enough that the seat switch will be mounted as shown in post #2.