I am looking to add a Woods backhoe to my L3240 HSTC. I also will be installing a Kubota 3rd function valve kit on my LA723 loader to allow me to use the grapple. From my research I simply create a "loop" on the Power Beyond circuit of my loader valve. Sound like I come out of the loader control Power Beyond port, travel up to the 3rd function valve, from the return of the 3rd function valve instead of going to the tank I would then travel back to the rear of the machine for the backhoe, and then finally back to the "tank" on the hydraulic system. When the backhoe is removed the rear lines get plugged into one another.
This sounds fine but will require me to get some hoses made. Is there a rear hydraulic accessory offered by Kubota for the lines instead? I have read about "1st", "2nd", and "3rd" function remotes but they all seem to be reliant on a new control to operate. All I really need is a passive pressure line and return that is always on I think.
Any clarification would be apprechiated.
Thanks
This sounds fine but will require me to get some hoses made. Is there a rear hydraulic accessory offered by Kubota for the lines instead? I have read about "1st", "2nd", and "3rd" function remotes but they all seem to be reliant on a new control to operate. All I really need is a passive pressure line and return that is always on I think.
Any clarification would be apprechiated.
Thanks