pushrod setup b7100hst

ttfo

Member
Oct 3, 2012
35
0
6
Custer, SD
i removed the pushrods on my b71hhst, and di not take any pics, because I do have a service manual and Kubota part diagrams.
I have the 6 pushrods and 6 caps. in all diagrams they do not show the caps. can anyone show me whre the caps go? they look like they go at the bottom of the pushrods against the lifters. But how do they stay on the pushrod while installing?

Thanks
 

meanjean

New member

Equipment
Kubota L1801
Aug 10, 2010
918
0
0
Hazelridge, Manitoba
Good morning ttfo.
I'm not 100% certain that this is proper but I've gone thru the same process with a similar machine.

Do the caps have holes in the sides near the bottom?
The caps should sit under the pushrods as you suggested.

But how do they stay on the pushrod while installing?
The push rods sit in the cups.
I believe they may actually be magnetic, mine were.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
20,915
77
48
Sandpoint, ID
On a D750 The cups or caps go on top of the valve stems, not the push rods.
 

meanjean

New member

Equipment
Kubota L1801
Aug 10, 2010
918
0
0
Hazelridge, Manitoba
Attached is a picture of my head from above.
The push rods are beneath the 4 slotted bolts at the top of the picture.
The cups fit under the push rods, I wish I had a better picture.
One end of my push rods are magnetic.

Sorry bud, I thought the set up would be similar.
 

Attachments

ttfo

Member
Oct 3, 2012
35
0
6
Custer, SD
wolfman,
Thanks... I did have some pics of the valves and now I see them. For some reason I thought they went on the push rods. Thankkkkkkkkssss....

MeanJean.
Thanks for replying...

ttfo