Purchased a M5660 for general use. It does not have draft control(which I was told when purchasing). I had someone pick me up a set of plows at an auction which are 3 x 16. When using them the tractor seems yo have difficulty pulling through the soil with them and at times the tires will spin even in 4wd. Seems like I am raising and lowering the 3 point frequently to get much done.
Now looking at the manual the max size of plows the recommend is 2 x14(always read your manual BEFORE purchasing).
Should I:
1.Take one plow and coulter off if I can?
2. Get front weights which may help the front stay more firmly planted on the ground?
3.Get another set of plows that are 2 x14?
4. Just the way it is without draft control?
Thanks for the advice
Now looking at the manual the max size of plows the recommend is 2 x14(always read your manual BEFORE purchasing).
Should I:
1.Take one plow and coulter off if I can?
2. Get front weights which may help the front stay more firmly planted on the ground?
3.Get another set of plows that are 2 x14?
4. Just the way it is without draft control?
Thanks for the advice