M8950DT, week hydraulics for loader bucket

[Mikebyeman]

I'm looking for advice on how to fix my loader hydraulics. I have read about a relief valve but don't know exactly were it is located.

 

[North Idaho Wolfman]

I'm looking for advice on how to fix my loader hydraulics. I have read about a relief valve but don't know exactly were it is located.

Do you have the WSM?
If not, get it,
It will have locations of parts, testing procedure of parts or the system, and the repair procedure of it.

 

[lugbolt]

Hydraulic systems can be dangerous. Don't fiddle with it unless you're 100% familiar with it and comfortable playing around with high pressure fluids. The fluid can (and will) go right through your skin with the velocity of a bullet.

 

[SidecarFlip]

Years ago a fellow employee at a place where I worked at injected himself with high pressure hydraulic fluid and lost his arm below the elbow from it. Nothing to fool with. Same with an airless paint sprayer. Don't take much either. 2000 psi fluid will readily inject under your epidermis with horrible results.

 

[Mikebyeman]

dose anyone know were I can find a WSM for a M8950dt

 

[North Idaho Wolfman]

dose anyone know were I can find a WSM for a M8950dt

Sadly that WSM is not available for free, or cheap.

P/N 97897-10043

There is one on ebay right now for $100.88 that's $75 or more cheaper than a new copy.

https://www.ebay.com/itm/Kubota-M89...Service-Manual-97897-10043-used-/183489262220