T Texaspsdx New member Jul 28, 2013 2 0 0 Richards, TX Jun 8, 2014 #1 Will only lift if I pull lever all the way to the top. Then I push lever down and arms start lowering. I have to pull lever back up and try to stop arms at level I want. Tractor is a 2000 model with 454 hours on it.
Will only lift if I pull lever all the way to the top. Then I push lever down and arms start lowering. I have to pull lever back up and try to stop arms at level I want. Tractor is a 2000 model with 454 hours on it.
Bulldog Well-known member Equipment M 9000 DTC, L 3000 DT Mar 30, 2010 5,440 73 48 Rocky Face, Georgia Jun 9, 2014 #2 I don't see how it would affect the lift but does your tractor have a draft control?
North Idaho Wolfman Moderator Staff member Lifetime Member Equipment L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more Jun 9, 2013 28,800 5,180 113 Sandpoint, ID Jun 9, 2014 #3 I thought I wrote this earlier but it got lost somewhere??? Check the feed back linkage it's located on the top of the three point arms and goes back to the lift and draft valves.
I thought I wrote this earlier but it got lost somewhere??? Check the feed back linkage it's located on the top of the three point arms and goes back to the lift and draft valves.