Lots of tool boxes for tractors out there. 3 point work station, tool box.

bearskinner

Active member

Equipment
BX25D, snowblower, PHD, Grapple, Snow blade, land Plane
Sep 1, 2014
924
237
43
N. Idaho
Always a problem carrying tools, chainsaws, parts etc. Took apart a wooden crate, and ground the rust off an old piece of angle iron, a little cutting, welding and a few screws, now I can carry needed items with me.
A solid lid to use as a work bench too. I’ll mount my chainsaw carrier to it as well.
IMG_2219.jpeg
 
  • Like
  • Love
Reactions: 6 users

GrizBota

Well-known member

Equipment
L3830HST/LA724, B2601/LA435/RCK54-32, RCR1872, CDI 66”grapple, pallet forks
Apr 26, 2023
1,098
699
113
Oregon
Nice. How is it mounted to the three point?
 
  • Like
Reactions: 1 user

Runs With Scissors

Well-known member

Equipment
L2501 TLB , Grappel, Brush Hog, Box Blade, Ballast box, Forks, Tiller, PH digger
Jan 25, 2023
1,722
1,826
113
Michigan
Very nice.

Like Grizbota, I would also like to see pics of how it is attached.
 
  • Like
Reactions: 1 user

bearskinner

Active member

Equipment
BX25D, snowblower, PHD, Grapple, Snow blade, land Plane
Sep 1, 2014
924
237
43
N. Idaho
It’s scrap metal from my metal pile built, mounted on a ( harbor freight) quick hitch. I had 2 sets of pin extenders, so although new parts, they didn’t cost me anything. Top pin is a 6” bolt with a cut off piece of gas line steel pipe over it. I’ll get a pic of it off tomorrow.
Some black tractor paint and a quick coat of poly on the wood. I’ve used it every day since I built it.

IMG_2220.jpeg
 
Last edited:
  • Like
Reactions: 2 users

bearskinner

Active member

Equipment
BX25D, snowblower, PHD, Grapple, Snow blade, land Plane
Sep 1, 2014
924
237
43
N. Idaho
Here’s a couple pics with it off

IMG_2258.jpeg
IMG_2259.jpeg
IMG_2257.jpeg
 
  • Like
Reactions: 6 users

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,306
4,856
113
Sandpoint, ID
HEY, there's where my blue knife ran off to!
 
  • Haha
  • Like
Reactions: 1 users

bearskinner

Active member

Equipment
BX25D, snowblower, PHD, Grapple, Snow blade, land Plane
Sep 1, 2014
924
237
43
N. Idaho
Very nice!

I wonder if some small legs would be helpful in regard to making hook up and disconnect a little easier?
I was thinking about some stiff legs or wheels, but it’s pretty light, so I can just unlatch the QD levers pick it up and put it somewhere.