Looking for something to protect floor from chains

wshamp

New member

Equipment
MX6000
Jan 23, 2022
5
1
3
Vermont
I will be keeping my MX6000 in a shipping container for a while. I have OFA Eko 9 chains that I am worried will destroy the plywood floor of the container. Looking for some ideas of something to put on the floor to protect it. I was thinking of using stall mats but was curious if anyone else has had experience with this.
 

orange crusher

Well-known member

Equipment
BX 2680
Sep 30, 2017
356
479
63
ontario canada
I was using stall mats but found that the melting snow created puddles of water under the mats. As long as you don't spin your wheels, the chain damage should be minimal
 
  • Like
Reactions: 1 user

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,286
4,852
113
Sandpoint, ID
Second the stall mats (Thick reinforced rubber) Or a couple sheets of sacrificial plywood is good too.
 
  • Like
Reactions: 1 users

BigG

Well-known member

Equipment
l2501, FEL, BB, Rotary cutter, rake,spreader, roller, etc. New Holland TL80 A
Sep 14, 2018
1,950
774
113
West Central,FL
Used conveyor belts. Look at FB or Craigslist for some.
 

Kubotica

New member

Equipment
B2650, M5-91
Jan 23, 2022
25
9
3
Catskills
Tractor Suply sell rubber mats that are 8"x4'. maybe you can buy one and cut it in two narrower pieces ?
I use two old planks under when I back up in the garage.
 

jajiu

Active member
Lifetime Member

Equipment
L3560 HSTC, Grader, Backhoe, Snow Plow, Pallet Forks
Jun 5, 2016
453
111
43
73
Rowley, Massachusetts
I have a new garage built this past summer and I use the Tractor Supply Stall Matts. I line them up in two rows full length of plow, tractor, rear blade.
 

Tioga Tim

Member

Equipment
B2620
Nov 11, 2020
30
7
8
Upstate New York
I will be keeping my MX6000 in a shipping container for a while. I have OFA Eko 9 chains that I am worried will destroy the plywood floor of the container. Looking for some ideas of something to put on the floor to protect it. I was thinking of using stall mats but was curious if anyone else has had experience with this.
Probably too late to help you...I had the same issue with the plywood floor of my shed. I went the cheap way - bought two 1x12 10 foot hemlock boards from the local sawmill and screwed them down to the floor. Worked fine. Easy to store once I took them back up this spring.

Tim
 

TheShadyKubota

Active member

Equipment
2021 BX2380 w/ a plethora of attachments
Apr 1, 2022
105
81
28
Manitoba, Canada
I'd highly suggest SwissTrax flooring for the stall that your tractor parks in.


You can even colour match with a very close orange if wanted.
 

radas

Well-known member

Equipment
2022 LX2610HST, 3rd Function, Rear Remotes, BH77
Mar 21, 2022
721
831
93
Michigan
Go with stall mats and drill a few holes in them to allow trapped water to better evaporate.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,286
4,852
113
Sandpoint, ID
I'd highly suggest SwissTrax flooring for the stall that your tractor parks in.


You can even colour match with a very close orange if wanted.
Have you actually use this flooring with Chains on a tractor?

I can't see a hollow plastic flooring holding up for more than a few seconds of chains rolling on it.
 

TheShadyKubota

Active member

Equipment
2021 BX2380 w/ a plethora of attachments
Apr 1, 2022
105
81
28
Manitoba, Canada
Have you actually use this flooring with Chains on a tractor?

I can't see a hollow plastic flooring holding up for more than a few seconds of chains rolling on it.
Personally I have not however I did order my flooring a couple days ago. My friend has this system (JD 3046) but he has his spill containment on top that he parks on. Most garages you're only crawling in and out of, hasn't wrecked it yet.

I'll let you know how it goes.