Leaks from both pivots on front axle steering?

493mike

New member

Equipment
Front loader, front snowblower, brush hog, tiller, back blade, soft cab, roller.
Sep 18, 2017
6
0
1
White Cloud, MI
I recently noticed leaking on my B2920 front axle. Where can I find a parts diagram/part numbers to repair this?
Mike
 

493mike

New member

Equipment
Front loader, front snowblower, brush hog, tiller, back blade, soft cab, roller.
Sep 18, 2017
6
0
1
White Cloud, MI

Will have diagrams as well as current part nos. Sometimes part nos. are superseded.
Thank you for the site address. I'm no computer guru and can't open the PDF (it is grayed out) under the Help tab to allow pop ups? Could you guide me please?
Mike
 

old and tired

Well-known member

Equipment
L2800 HST; 2005; R4
Thank you for the site address. I'm no computer guru and can't open the PDF (it is grayed out) under the Help tab to allow pop ups? Could you guide me please?
Mike
Mike, the link should not be a PDF.... you should see after clicking on the link what's in the photo below...

Is your tractor a B2920HSD? What serial number is your tractor... depending on the SN is which seal to buy.
 

Attachments

Russell King

Well-known member
Lifetime Member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
6,390
2,033
113
Austin, Texas
Thank you for the site address. I'm no computer guru and can't open the PDF (it is grayed out) under the Help tab to allow pop ups? Could you guide me please?
Mike
Go to the Kubota USA dot com website (I typed it out but use normal format or search)
then select illustrated parts list
then select the agree to terms box
then search for your tractor model and then find the correct section to look at (front axle)
 
  • Like
Reactions: 1 user

Tioga Tim

Member

Equipment
B2620
Nov 11, 2020
42
16
8
Upstate New York
I recently noticed leaking on my B2920 front axle. Where can I find a parts diagram/part numbers to repair this?
Mike
My 2620 was leaking on one side. I topped off the resevoir with heavier gear oil and that seemed to take care of the problem. I was running the Kubota 30 wt per the manual -thought that seemed pretty light to begin with.

Tim
 

493mike

New member

Equipment
Front loader, front snowblower, brush hog, tiller, back blade, soft cab, roller.
Sep 18, 2017
6
0
1
White Cloud, MI
Thanks for the responses fellas! I found the seal and correct P/N. It appears i need to remove the 4 bolt flange holding the bevel drive to the axle housing to accomplish the disassembly to replace the seal.
Mike
 

BAP

Well-known member
Lifetime Member

Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
Dec 31, 2012
2,927
1,040
113
New Hampshire