First time tractor owner looking for any advice on removing the front loader. I have found the front and rear pins I believe I need to remove, but have no figured out how it is supported at the back of the loader upon removal. There are 2 bars which are clipped inside of the front arm and a further 2 which are running across the tractor just in front of the steering wheel, if any of you could point me in the right direction I would be extremely gratefu!.
LA 350St Loader. Removal
- Thread starter Marcusaglass
- Start date
I had a BF300 on a B8200 and I think they are similar.
The two arms located near the steering wheel go into clips on the outside of the bucket. There were two "L" shaped bolts at the front of the tractor the are removed. There are wedges at each loader tower (the big vertical metal on each side) that have a nut holding a wedge on each side. Remove the wedges. There are two 3/4" square stand pieces that have a bend on one end. That bend fits into the loader tower to support that end.
Maybe that is enough to get you started. Maybe look on YouTube for first person guidance.
The two arms located near the steering wheel go into clips on the outside of the bucket. There were two "L" shaped bolts at the front of the tractor the are removed. There are wedges at each loader tower (the big vertical metal on each side) that have a nut holding a wedge on each side. Remove the wedges. There are two 3/4" square stand pieces that have a bend on one end. That bend fits into the loader tower to support that end.
Maybe that is enough to get you started. Maybe look on YouTube for first person guidance.
Removing LB400 FEL from Kubota L2350DT.....a how to.
I've never had the occasion to need to do this (remove FEL)... but when I first purchased the tractor I was unable to find any step by step instructions explaining the procedure. I found an operators manual for the FEL with that information and thought I'd post it here for posterity's sake...
www.orangetractortalks.com
Is it similar to this tractor/loader?
Many thanks, just what I neededRemoving LB400 FEL from Kubota L2350DT.....a how to.
I've never had the occasion to need to do this (remove FEL)... but when I first purchased the tractor I was unable to find any step by step instructions explaining the procedure. I found an operators manual for the FEL with that information and thought I'd post it here for posterity's sake...
Is it similar to this tractor/loader?
