I have a 2019 L6060 HSTC Grand with a OEM (Grammer) air ride seat. I understand that this factory option technically disables the stationary PTO function. You cannot tilt the air ride seat up to operate the PTO in stationary mode, and Kubota offers no official solution. I also know that if I place a jumper wire across the blue and black wires that the seat harness plugs into, I can set the brake, engage the PTO and leave the operators station with the PTO continuing to run. The only time I want to operate the PTO in stationary mode is with a PTO driven wood chipper. For all other tractor operations, I would prefer to leave the seat switch operational, rather than having it jumped out all the time. I want to install a two position rocker switch in the cab, where one position is normal operation (original seat switch wiring), and the second position with the seat switch jumped, for wood chipper operations. I'm having a hard time figuring it out, and was looking for some help. Has anyone ever installed a switch for this? I appreciate any assistance offered.